Search Results

Hi, I downloaded the embOS trial version source code(embOS_ARM_IAR_V6_Trial_V414.zip) from https://www.segger.com/downloads/embos link i successfully build the LED blink application code on the IAR(Version 7.60) for freescale's imx6ul processor. Now my task is to run LED blink application on MCIMX6UL-EVK board.for this i am loading .bin(output binary file) to SD card through loads command (through teraterm) but its hanged somewhere(plz see screen shot) so for check i used putchar() instruction f…

hi, thank u very much for your reply i proceed what u suggested but finally connection not establish. i uploaded u the screen shot. please find the attachment. Thanks Atma

Hi, We are working on the freescale's(now NXP) imx6ul evk board and trying to establish the jtag connection from pc to board. In some board related document, it is mentioned that in order to correctly connect to the JTAG port of the board with the RealView-ICE Debugger or the JLINK debugger, five resistances R1432, R1407, R1431, R1433, and R1434 need to be removed. Could someone please let me know how to achieve the removal of resistors to get the connection work. Do we remove the resistors thro…

Hi, I am new on the embOS.I want to do C programming on SEGGER RTOS but don't know how to proceed.I am using freescale's Processor Expert tool for build my application, MCIMX6ULK-EVK board and SEGGER's J-link EDU version JTAG to load files so tell me what the version of SEGGER's embos are supporting to freescale's imx6ul processor and processor expert tool.If not than what tool i preferred we will purchase if SEGGER embos support is there. :) Thanks Atma Prakaash DSP Engineer ATC Labs Pvt Ltd(In…

Hi, I am using freescale IMX6UL-EVK board before few weeks.I have some new task to do with jtag now but unable to proceed due to jtag connection failure. I have made proper connection of JTAG with my board but j-link is not detected my board.I downloaded windows jtag driver software from SEGGER - The Embedded Experts - Download link but whenever i run JLinkGDBServer.exe in the installed driver folder it was unable to connect my board.I attached u the screen shot of this in which jlink is detecte…