Search Results

Good afternoon, I am not using a EVK, its a my own design. where i can check how models of H7 you can support this functionability? if you can not add this function by software update, i understand that you can do by a hardware update not? I question it because i planned to buy a professional segger tool Thanks for you time and help

Good afternoon, I'm trying to use the SWO - Printf functionality with a JLINK EDU and the STM32H735VGT MCU, but I don't know what's missing to make it work. I think it is something related to the configuration, because I have used the same board and MCU with a STLINK2, and the SWO + printf works correctly. Attached is a screenshot of the STLINK2 and JLINK configuration in the IDE. IDE: Keil MDK 5.36 JLINK EDU FW: J-Link V10 compiled Nov 2 2021 12:14:50 DLL: V7.62 Thanks for your time.

Good afternoon, I was wondering if there is a way to apply for a temporary licence to use the J Flash SPI. My bios chip has been bricked, and I would like to try to recover it with the JLink EDU. Thanks for your help. Kind regards.

Good afertnoon Fabian, Thank you for your answer. I have checked that the problem is not in the jlink, if not the problem was a external supervisor (chip) that is damaged and afect at the reset line. I desoldered it and i checked that this didnt happen. I replacec by other and and all work correctly. Thank you very much for your help The post can be closed. Note: - I will open another post for the Jlink configurator problem that I don't know why I can't configure the device.

Hi Fabian, Thanks for you answer so quickly and help me. I appreciate so much. If i am honest, now worry the problem that i cant use the Jlink EDU with the Jlink Configuration (yesterday attach a screenshot) What i can do? I test the solutions that i told you yesterday, and looking in the forum similar cases but it has not worked Regarding the problem of the memory debug address: According to what you say, i have test with other app, with the same MDK (version), and the problem is the same. I do…

Hi Fabian, Thanks for you repply. Tomorrow i will send you the information you request But i think that the error come by other side, i tell you: I tried to downgrade firmware version of the jlink EDU (to 6.88a) for if have some problem with the actual 6.94. When i did it i had the next error: i attach image. I was surprised because i was working with it without problem. I checked the connection from jlink commander and i followed the pasos to test the connection without any problem. I have also…

Good morning I have a problem very strange with mi Jlink and i was hoping that you could help me I will put you in context: I am using a Jlink EDU for a proyect that i am doing at home, but when i debug the following happens to me - WHen i go into debug or do a reset from the IDE, it goes to a wrong memory location (attach screenshot). if i put the pc the correct memory location, it debugs correctly but when i do a reset from the IDE, it backs to the wrong location (yes its always the same). if …