Search Results

Hi Fabian, thanks for your reply, i tried s19 with Jflash, it still doesn't work, same issue was report when S19 file is programed. forum.segger.com/index.php/Attachment/5383/

W38 have 512KB flash, when try to program a bin or S19 which is larger than 256KB with Jflash GUI, it always says selected data does not fill into selected flash sector, refer to below figure 1. But with same image if I use jlink command to download, it can success, log can refer to below figure 2, also tried to download with IAR+JLINK, it can also download well. not sure why Jflash GUI can't work, need expert's support. forum.segger.com/index.php/Attachment/5379/forum.segger.com/index.php/Attac…

Hi , I am using RT1176 which need external flash to store nor flash, now more and more customer use flash >64MB, i modified a flash algorithm, but found no matter how much the Maxsize is, the Jflash GUI only support 8192x4K=32MB, the Jflash version is the latest already. also tried to add flash bank， still doesn't work, could we improve it. forum.segger.com/index.php/Attachment/5099/forum.segger.com/index.php/Attachment/5100/

Hi expert, I am trying systemview3.2 with Jlink plus, but after i select Jlink and click OK, there is no further reaction(normally it should remainder user to select MCU device), the figure is as below. per my understanding, though my MCU program is not right, the system view still should display the window to select chip part number. I tried version V3.12, it work well, so does it mean the system view have version requirement for the driver in MCU side?

Hi Segger Expert, Any update for this? thanks.

The Flash customer use is MT25QL01GBBB8ESF , which is 128MB, while by default in NXP demo board the size is 16MB. per below first pic 1, Segger default supported maximum nor flash size is 64MB. Below pic 2 and 3 are the error message showed when executing flash programming with a image about 82MB. forum.segger.com/index.php/Attachment/4804/ forum.segger.com/index.php/Attachment/4806/forum.segger.com/index.php/Attachment/4805/

my customer is using RT1176, due to big picture resource, they changed the default on board 16MB flash to 128MB, but found the maximum support show in Jflash is 64MB，and with the default configuration even can't program Flash which image is >16MB. so there are two issues: 1. how to support >16MB image programing with the current settings. 2. How to extend to support 128MB flash. Expect to get feedback， thanks. forum.segger.com/index.php/Attachment/4800/