Search Results

Hi, Hip Hip Holley !! finally, it's solved ! I didn't found the problem in itself but i succeeded to erase the whole Flash memory by using the CM3WSD software. PS: i tried to erase the flash memory using IAR -> download -> erase memory and it showed the same error as described upper. Thx for all and For you Alex. Have a good day !

Ahh, in fact it's a code from the examples provided with the miniboard (ftp.analog.com/pub/evalcd/ADuC…ntation/DasLib/index.html ) and it's supposed to be OK ! but as i said, i tried other codes which i tested with the other board and it didn't work neither. By the way, isn't there any tool or way to erase the flash a part of this IAR -> download -> erase memory 'cause the JLink debug log show the message "Jlink_IsHalted returns Error" million times and it seems to me that the CPU couldn't be st…

Hi, thx Alex for replying. here attached a code example that reproduced the error. the same project is well functioning in the other board. still have a question : can the flash memory be locked or something similar by downloading a defected code ? (cause all examples that i tried to implement show up the same error !!)

problem resolved !! in fact, i didn't change the connection interface from JTag to SWD. that's all ! thx.

Hi, I was using my ADUCRF101 (MK1ZU2) and it was well functioning. but by changing some options in the IAR workbench, it seems that something turns wrong and the download instruction show an error "Could not measure total IR len. TDO is constant high". i tried to restore the old settings but the error persists !! PS : if this could help you determine the problem : by showing the output, it's clear that the miniboard still turn the code that i downloaded before changing the settings. -- here is t…

hi, here attached some screenshot of errors. thx.

Hi Alex, in fact, i have two minikits and the code that i'm using in well functioning in one and not in the other (which show the error below). i retried using the new version that you mentioned but the problem persists. and here is the new Debug log : Mon Jun 25, 2012 18:09:11: Loaded macro file: C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.0\arm\config\flashloader\AnalogDevices\FlashADUCM3xx.mac Mon Jun 25, 2012 18:09:11: JLINK command: ProjectFile = D:\YASSIN\programmes\CD ADUCRF10…

Hello Segger-Support, I have trouble with J-Link used from "IAR Embedded Workbench IDE". If i download my program, so i get "J_link Dialog" with "Failed to get CPU status after 4 retries. Retry?" after this i can only abort the current session . I use ADUCRF101 (IAR KickStart Kit) evaluation board. -- Here is the Debug Log from IAR Workbench IDE : Mon Jun 25, 2012 17:17:35: Loaded macro file: C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.0\arm\config\flashloader\AnalogDevices\FlashADUC…