Search Results

Search results 1-3 of 3.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Keil/J-link Base - connect to the STM32F103VE problem

    Srobek - - J-Link/Flasher related

    Post

    Hello, I have connected with the STM32 microcontroller. The problem was that I did not connect power supply to the analog part of the microcontroller. I had connected VDDA and REF + to 3.3V and REF- to GND and it has run. I guess, the key was connect VDDA to power supply. Thank you for your help.

  • [SOLVED] Keil/J-link Base - connect to the STM32F103VE problem

    Srobek - - J-Link/Flasher related

    Post

    Thank you for your answer. In the J-Link Commander it looks similar. I attach screenshots. I'm not sure if the used connect sequence is correct. I used the default values. I'm using custom hardware. The connection diagram of the microcontroller has been attached.

  • [SOLVED] Keil/J-link Base - connect to the STM32F103VE problem

    Srobek - - J-Link/Flasher related

    Post

    Hello, I use Keil uVision 5 for STM32F103VE programming. I have JTAG: Segger J-Link Base v9.2, but I can not connect to the microcontroller. Since this is my first project, please help me solve the problem. These are messages that uVision displays after selected "Start Debug Session": Load "C:\\ARM\\Cwiczenia\\Agregat_2\\Objects\\agregat_2_test.axf" Set JLink Project File to "C:\ARM\Cwiczenia\Agregat_2\JLinkSettings.ini" * JLink Info: Device "STM32F103VE" selected. JLink info: ------------ DLL: …