Search Results

@Cody Lundie Niklas is correct, FRDM-KL82 is the opensdav2.0, not the opensda v2.1, please try to use openada v2.0 firmware in the win10 or the win7 again. Besides, you also can try another board, not only just one FRDM-KL82 board. Any question, please contact with me or follow this post. @ Niklas, Thank you for your notification and quick support ! Best regards, Jingjing

Hi Niklas, Thank you very much for your quick response. Could you tell me which platform your are testing? My customer is using the NXP FRDM-KL82 board, when he drag the JLINK OPENSDA v2.1 to the bootloader, after power up and connect to the win10 system, the JLINK is not working. Now I will tell my customer to follow this post, and give you his information and test result directly! Best Regards, Jingjing

Hi Support, From this link in your web: segger.com/opensda.html We know that, the Segger is supporting the Opensda v2.1 JLINK firmware, but one of our customers find when they use it on their window10 PC system, it can't work on the NXP kinetis Freedom platform, and I can't find the OS supporting information on your web, just see it supporting the windows system. Could you help me to check it,whether this firmware is supporting the window10 system? Any reply will be appreciated. Best Regards, Ji…

Hi Erik, Could you help me to check another question which I post: JLINK will disable the watchdog in Freescale kinetis automatically? Thank you very much!

Hi All, Recently, I find when I use JLINK as the debugger and debug the Freescale kinetis product, the watchdog in kinetis product will be disabled automatically, no matter using which IDE, eg Codewarrior, IAR, MDK, all have the same result: watchdog is disabled, and I can assume that the code didn't do the watchdog disable operation. Actually, the watchdog in Freescale kinetis product is enabled after reset, so I want to know is the JLINK script do the watchdog disable operation in kinetis prod…

Thank you very much for your reply! I already script it in the link which you give me!

Hi All, I am using Freescale Kinetis product, KE02Z64, when I use JFLASH to download the hex, I meet the ERROR: Program (0x10000000 - 0x100000FF) does not fit into selected flash sectors. 0x10000000 - 0x100000FF is the eeprom address for KE02, it is not the flash address. So I want to know, whether there have some configuration in the JFLASH to enable the eeprom address, or the Jflash software have the limited function? BTW, I can use JLINK with IAR or MDK to download it, so my hex have no probl…