Search Results

Hi Thomas, Sure, SN: 752000737 Thanks for confirming that, hardware-wise, it is within the operating ranges, regarding your points: 1. no other signals or traces are connected to the trace data pins, although our connection is somewhat inadequate at the moment, we plan to include a proper connection on the next board revision. 2. I followed this adjustment guide once already, but for us it was somewhat a guesswork as our connection gets bad when we jump from 2 to 4 data lines, so we must try to …

Hello everyone, We are having trouble getting tracing to work with our target at full clock speed and would like to understand why, we have an application running on STM32U575 @ 160MHz CPU clock, we also connected the J-Tracer to it using a connector glued next to the uC and short wires (~10mm) to PE2 ... PE6 (pins 1 to 5 on the LQFP100), the GPIO pins are all configured (using a JLinkScript) as AF and at maximum speed, and what we understood from the documentation (Arm trace technical specifica…

I manually copied the Jlink DLL to the Ozone folder and now it shows the dialog, thanks AlexD! by the way, the installer does not allow to update the DLL of other tools if you are installing/updating without admin rights (for the current user only), even if the other tools are also installed for the current user only (which was my case, that's why I believe the DLL was outdated in my Ozone)

Hi, Since some versions of Ozone (now I am using the latest, 3.30d) I don't see the target flashing progress bar anymore when flashing the target, my Ozone just hangs with the window unresponsive, after the flash it returns to work, my colleagues do not seem to have this problem. I have already tried to reinstall it, but it doesn't solve the problem, but I also noticed that the reinstall is not resetting the configuration, as I can still see projects in the "recent projects" tab and so on, so my…