Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Florian -

    Replied to the thread create a memory device in to a window.

    Post
    Hi, the sample I've attached is very simple, it demonstrates how to use memory devices. This works in a window as well. Best regards, Florian
  • monjiemegoo -

    Replied to the thread create a memory device in to a window.

    Post
    thank you so much for repling me Florian but i also wanna know how can i create a memory device in to a window in general.
  • MWet123 -

    Posted the thread Error importing eclipse project STM32.

    Thread
    Hello everybody, I want to import a STM32-Project into Embedded Studio because I want to get rid of the CubeIDE. I created it with CubeMX,... but if I want to import this project I get an error (see picture). I think CubeIDE is based on eclipse, so it…
  • SEGGER - Florian -

    Replied to the thread create a memory device in to a window.

    Post
    Hi monjiemegoo, you need to know that the routines GUI_MEMDEV_FadeInWindow() and GUI_MEMDEV_FadeOutWindow() are blocking routines, that means no other code will be executed when these routines are running. I've attached a sample that avoids this…
  • SEGGER - Schoenen -

    Replied to the thread feasibility study for tft.

    Post
    Hi, This depends pretty much on what you intend to do. Also the size of the LCD is important. Basically emWin will perform quite well on such a device, but you shouldn't expect a high performance when you want to draw a lot of semi transparent stuff…
  • monjiemegoo -

    Posted the thread create a memory device in to a window.

    Thread
    hellow guys i wanna create a memory device and pass it to a window then move the window and fadein and fadeout memory device. i know how to move a window and also know how to fadein and fadeout but i dont know how to use memory device capabilitis inside…
  • sridhar6994 -

    Posted the thread feasibility study for tft.

    Thread
    hi I am currently developing a TFT based application My controller is 300Mhz and TFT refreshing frequency is 30Mhz SRAM is 16MB and ROM Flash Memory is 128MB I am developing with nuvoton processor N9H30 with ARM-9 core Is my things sufficient for…
  • markuskrug -

    Posted the thread Undocumented Icon in the Project Explorer.

    Thread
    Dear all, I just setup a new Project in SES. For the first time I drag+drop ontents from previous projects - which is a great help for me. These Contents get marked with an Icon that I couldn't found in the SES Manual. It looks like the one in the…
  • shuodo -

    Posted the thread 20 pin 0.1" to 10-pin 0.05" JTAG adapter.

    Thread
    Hi, My JETSON-AGX-Xavier has an 10-pin (2x5, 0.05 inch pitch) JTAG header. So I need a 20 pin 0.1" to 10-pin 0.05" JTAG adapter to connect my J-Link to my Xavier's JTAG header. I want to know will one of these works (or both work):
  • SEGGER - Nino -

    Replied to the thread Simple project using libopencm3 in SES.

    Post
    Hello, Thank you for your inquiry. Great to hear that you found a solution to implement the library in your project. For completion for other users that stumble upon this thread, Embedded Studio comes with a CPU support package manager that uses CMSIS…
  • bearsh -

    Replied to the thread Ozone: Display issue in Ozone.

    Post
    Hi Nino Ok, how should I submit the files? Is there a way without attaching it to this thread/forum? EDIT: I've created a ticket: Inquiry#60127403
  • SEGGER - Nino -

    Replied to the thread Debugging Assembler project with J-Link Edu.

    Post
    Hello, Thank you for your inquiry. A question mark on a breakpoint usually indicates that for this code part no instructions have been compiled and it is not part of the currently debugged application. This can be due to compiler optimization, not using…
  • Hello Christian, Thank you for your inquiry. The makefile exported from Embedded Studio sets paths as they are used inside Embedded Studio. This will also work for most makefile compatible third party tools. If you use other third party tools that…
  • SEGGER - Nino -

    Replied to the thread Target Connection Has Been Lost - but why?.

    Post
    Hello, Thank you for your inquiry. Usually a connection drops when a target does an illegal memory access and crashes or when the target goes to sleepmode or executes a WFI. Is one of these points possible for your setup? Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Ozone: Display issue in Ozone.

    Post
    Hello, Thank you for your inquiry. Such an issue is not known to us. Could you provide a snapshot and the corresponding elf file for reproduction? You can take the snapshot in Ozone via Debug->Save Snapshot. Leave all options on when taking the…
  • bearsh -

    Posted the thread Ozone: Display issue in Ozone.

    Thread
    With Ozone v3.10 (on Ubuntu 18.04) I have similar display issues like described in [SOLVED] Ozone: Corrupted code profile window see also attached screenshot. thx
  • samsam -

    Replied to the thread strlen bug?.

    Post
    Ok I added couple additions and function calls to trigger variables evaluation, but still getting weird results :( Still cant find any logic in the math returned - tomorrow with fresh mind will look it again :( One thing only is sure - the Locals Window in…
  • awneil -

    Replied to the thread Target Connection Has Been Lost - but why?.

    Post
    Hmmm ... now a new behaviour: The RTT trace has stopped, the Target has restarted - but the J-Link is still showing as 'Connected' so the SES Debug view is still there, but doing nothing. BTW This is SES 3.40 and a Nordic nRF52832. It's only started…
  • awneil -

    Replied to the thread Target Connection Has Been Lost - but why?.

    Post
    OK, so I found the option to enable a J-Link Log file. In the log file, I see this pattern repeating: Source Code (12 lines) which, I guess, is the J-Link polling for RTT data? Towards the end of the log, it changes to: Source Code (10 lines)which…
  • awneil -

    Posted the thread Target Connection Has Been Lost - but why?.

    Thread
    While debugging, I am getting 'Target connection has been lost' after a while: forum.segger.com/index.php/Att…f8d4123590009ca754222bf3f The trouble is, the debugger then closes immediately - so all the RTT debug output, etc, up to that point is…