Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • thomask77 -

    Replied to the thread ST-Link Reflash Utility for ST-LINK V3E ?.

    Post
    Sad to hear that. The small NUCLEO-32 boards do not have the MIPI-10 connector. Also, I think the Reflash-Utility was a great marketing tool for both Segger and ST.. at least that's how I tested Ozone/SystemView and convinced my company to buy some…
  • scotty -

    Replied to the thread J-Scope issues.

    Post
    Hi Arne, today, I found the time to evaluate the beta version 6.11m of J-Scope. My investigations showed some differences related to version 5.10d. (Compare the above mentioned items.) 1) OK, the problem with the floating pointer numbers is solved. I…
  • crivelma -

    Posted the thread LISTVIEW_SetItemBitmap.

    Thread
    Hi all. I have an issue regarding the creation of a page with emWin that is using LISTVIEW_SetItemBitmap. I want to put all bitmap on flash filesystem and load them one by one with LISTVIEW_SetItemBitma. The fact is that the function require a (const…
  • sagerchr -

    Replied to the thread Updating GUI_App.c not working.

    Post
    Hey, i tried without calling the GUI_Init() mulltiple times. I didn´t helped. Just to make sure that no hardware configuration problems are present i can tell that i followed these steps to create the source code.
  • SEGGER - Schoenen -

    Replied to the thread Updating GUI_App.c not working.

    Post
    Hi, Is GUI_Init() beeing called multiple times? You Do this in your appliaction. I know that in some ST examples GUI_Init() is getting called before MainTask(). Call it just once. Regards, Sven
  • Pieter Eggermont -

    Replied to the thread STM32F7XX.

    Post
    We had indeed a duplicate :) Case closed :)
  • sagerchr -

    Replied to the thread Updating GUI_App.c not working.

    Post
    Hej, yes it is running the loop. When i probe "i" it is counting up. I also toggle now an LED on the bord and i see that the code is executed in the speed i want it to. So from that perspective i would say that timing in this case is OK. Is there…
  • SEGGER - Nino -

    Replied to the thread ST-Link Reflash Utility for ST-LINK V3E ?.

    Post
    Hello, Thank you for your inquiry. Currently there are no plans to add the ST-Link V3 to the reflash utility as all ST Evalboard released so far with this ST-Link version offer a debug interface for external probes so you can use your J-Link directly…
  • SEGGER - Schoenen -

    Replied to the thread Updating GUI_App.c not working.

    Post
    Hi, Do you get out of GUI_Delay()? I could imagine that the timing related functions are not correctly implemented and GUI_Delay() waits forever. Search for GUI_X_Delay() and GUI_X_GetTime(). GUI_X_GetTime() has to return a 1ms tick, either provided…
  • kraiskil -

    Replied to the thread Profiling CortexM0 with Ozone.

    Post
    Hi, thanks for confirming this. I looked into SystemView and RTT. If I understand correctly, I can get coarse-grained function execution times recorded with it, but only if I manually instrument the source code of the functions to monitor? While…
  • Pieter Eggermont -

    Posted the thread LISTVIEW - different styles.

    Thread
    Would it be possible to have, in a listview, 2 different styles on the rows? I mean, one row with an icon and text -> different column width definitions and the other row with other column definitions? See attachment for a better view of what I mean :)
  • sagerchr -

    Posted the thread Updating GUI_App.c not working.

    Thread
    Hej, i´m running stm32f469i-Discovery Board with CubeMX generated code in SW4STM32. When i run the source code below i will just get something like when i execute the code below: ---------------------------------- |Hello…
  • thomask77 -

    Posted the thread ST-Link Reflash Utility for ST-LINK V3E ?.

    Thread
    Will there be a ST-Link Reflash Utility for the new ST NUCLEO boards?
  • Hello Kevin, You are welcome. As the initial question has been answered this thread will be closed now. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Ozone 2.70a: unable to get Project.RelocateSymbols() working.

    Post
    Hello, Thank you for your inquiry. We were able to reproduce the issue. There was an error in how the command was handled. It will be fixed in the next Ozone version. There will be two limitations when this command may be used. 1. it must be called…
  • Hello, Thank you for the response! >Please not that this is *no* support forum! Also the J-Link that you are using is out of support period for over a year. So please understand that we can't offer prioritized assistance in such a case... Wow! I…
  • Hi Nino, Many, many thanks for saving me much time on this! Kevin
  • Hello, Please not that this is *no* support forum! Also the J-Link that you are using is out of support period for over a year. So please understand that we can't offer prioritized assistance in such a case... The dropping of data over Channel 1 with…
  • Hello Kevin, Thank you for your inquiry. We use the Samtec FTSH-110-01-F-DV in our designs. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [J-Trace] [Texas Instruments AM335x] Compatibility.

    Post
    Hello, Thank you for your inquiry. Generally that target device should be tracable with our J-Trace PRO Cortex probe. Could you name the S/N of your probe for verification? For that particular device we do not have a trace example project yet so you…