Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Sauci -

    Replied to the thread segmentation fault on linux ARM.

    Post
    Hi Alex, I sent you the wrong file, sorry. It appear to fail in function JLINK_DEVICE_GetIndex, as shown in the log bellow: Source Code (11 lines)Best regards, Guillaume
  • Sparky -

    Replied to the thread Ozone crashes after making Disassembly window floating.

    Post
    I would like to add a `+1` to this bug report. I experience the same bug with Ozone v3.22e on macOS Mojave 10.14.6. I have attached the crash report.
  • Any news about this? v3.22e changelog says nothing about fixes for menu display, or slow menu response. Are there plans to fix it? The slow menu response at least would be great. We can live with cutoff text in the menus I suppose. thanks Dan
  • SEGGER - Leon -

    Replied to the thread The apps need some Qt love, especially on MacOS.

    Post
    Hi, Thanks for your inquiry. Dialog buttons: I understand your concern and we are already aware of this. Please understand that the button position (and other GUI layout) is the way it is due to historical reasons. In the past, the J-Link software…
  • ReMike -

    Posted the thread Dark Mode for Mac Solution.

    Thread
    While official Dark Mode support for macOS is in work, there is an interim solution. There is no 'Theme' option in the macOS version of SES. However, there is an experimental option called "Qt Style Sheet". (Tools->Options->Environment->User…
  • RADustin -

    Replied to the thread TMS470 on J-link with J-Flash.

    Post
    I understand. When I use Jcommander and the W1 or W4 commands I can 'write' to flash, but once I close and reopen the Jcommander terminal and check the flash dump, all my 'written' data is gone. If I check the dump without closing the terminal the data…
  • robertlipe -

    Replied to the thread The apps need some Qt love, especially on MacOS.

    Post
    Outside of the Qt stuff, inside JLink, there are a couple of easy tweaks that would make it easier to use when trying to reverse engineer hardware or to twiddle bits on hardware outside the edit/compile/upload/reboot cycle. Inside JLink, there's…
  • robertlipe -

    Posted the thread The apps need some Qt love, especially on MacOS.

    Thread
    Firstly, thank. you for a great set of tools. This was my first exposure to JTAG-class tools and it's been amazing to reload code in a second from within GDB and immediately single step the first opcode or right through an exception handle. Amazing! I…
  • dnfuss -

    Replied to the thread Wrong source file opens.

    Post
    Hi Fabian Submitted, as requested. Kind regards David
  • Eclipse -

    Replied to the thread Error: Could not find core in Coresight setup(cortex-m55).

    Post
    Quote from SEGGER - Erik: “Hello, I just noticed that we received the same request via our ticket system. Sorry for the delay in response, your inquiry got overlooked somehow. This should of course not happen. As you are within valid support period,…
  • Eclipse -

    Replied to the thread How to switch the dormant operation mode from JTAG to SWD in JLINK Commander.

    Post
    Quote from SEGGER - Alex: “Hello, So far, your chip seems to be the only one out there that does not support the traditional JTAG / SWD selection sequences. We do not have seen any other request reg. this in the last couple of years since we support…
  • taotieren -

    Replied to the thread Abnormal function of Linux JlinkConfigExe.

    Post
    Right-click-> Configure. No configuration dialog box is displayed. There is no error message. But using JLinkConfigExe in linux. Right-click-> Configure. Can display the configuration dialog box correctly. CMSISM-DAP mode can be selected normally, but…
  • SEGGER - Alex -

    Replied to the thread Need to run Flasher RX on Win10.

    Post
    By the way: The correct tool to use for Flasher RX is the "J-Flash" software. The "Flasher V2.x" software is only compatible to the legacy Flasher 5 / Flasher 5 PRO programmers which do not even support RX. J-Flash is part of the software package:
  • SEGGER - Alex -

    Replied to the thread J-Link VCOM max baudrate..

    Post
    There may be a misunderstanding here. You wrote: 1250000 baud => 1,250,000 baud => 1.25 MBaud The J-Link EDU V10 does not have any hardware UART on the VCOM pins, so it does things in software. This means it has a certain limit of what is doable. Max.…
  • SEGGER - Alex -

    Replied to the thread TMS470 on J-link with J-Flash.

    Post
    You have an TMS470R1VF67 but selected a TMS470R1B512 in the J-Link software. These two devices are not guaranteed to be compatible from the flash programming point of view. We do not give any warranty that what you are doing will work. You are on your…
  • SEGGER - Alex -

    Replied to the thread segmentation fault on linux ARM.

    Post
    Hi Guillaume, Thanks for providing the log file. I do not see anything in the log file that indicates a crash / segmentation fault. The connection to the device is established, followed by a very loooong sequence…
  • Hello, So far, your chip seems to be the only one out there that does not support the traditional JTAG / SWD selection sequences. We do not have seen any other request reg. this in the last couple of years since we support SWD. There are currently no…
  • SEGGER - Alex -

    Replied to the thread How to check for available licenses using command line only.

    Post
    Hi Christian, To answer your question reg. closing J-Flash with an error code if called with command line parameters, in case no license is found: We will think about that in the next team meeting which is scheduled for Tuesday. However, I cannot…
  • SEGGER - Alex -

    Replied to the thread Connecting to Remote J-Link via IP not resolving.

    Post
    Hi, You are confusing J-Link name with hostname here. The -ip <Name> command was never meant to resolve hostnames but was meant to resolve J-Link nick names to an actual IP. J-Links can be discovered via a special UDP broadcast packet in LAN (This is…
  • SEGGER - Alex -

    Replied to the thread Abnormal function of Linux JlinkConfigExe.

    Post
    Hi, We need some add. information to be able to help here. 1. What does "unsuccessful" mean? (J-Link not listed in configurator anymore once switched to CMSIS-DAP mode? Listed but re-configure throws an error? If there is an error message, can you send…