Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Oliver -

    Replied to the thread [SOLVED] Flasher STM8 - Programming Self-Powered Device.

    Post
    Answered via mail. Summary: Flasher stand-alone power supply in the project settings was enabled by the customer by accident. Additional information: Quote: “The project settings override the Flasher default state (that is what you set with power…
  • Hello, we currently do not have an API in the Flasher Portable Plus to read an IDCODE from a file. Such an API is under development, but it does not have a high priority and I cannot give you a schedule. If you are interested in a faster development…
  • InfinitionIT -

    Posted the thread J-Link stuck in bootloader mode, won't update.

    Thread
    Hello, We have a problem with a J-Link Plus that we bought last year. Part number is 8.08.28, version is 10.1. Our problem is that the J-Link firmware fails to boot, so it falls back to a bootloader firmware that won't even accept USB connections,…
  • SEGGER - Nino -

    Replied to the thread Example for Interrupt in empower board.

    Post
    Hello, How to enable interrupts on your target device can be found in the corresponding target reference manual from NXP. This is a target specific questions which we can't provide information for. For Guides and Examplecode there are literally millions…
  • SEGGER - Arne -

    Replied to the thread I2C programming EEprom with Flasher ATE.

    Post
    Hello Bjarne, it is possible to directly program this EEPROM using the Universal Flashloader: segger.com/products/production…e/#universal-flash-loader (24C512 should work) It is also possible to indirectly program the EEPROM, but this requires a…
  • icwiener -

    Replied to the thread Import previously exported data graph in Ozone.

    Post
    Hi, I think I understand how snapshots are supposed to work now. Powerful tool. However, that's not what we would need. We would like to be able to fetch diagnostics data with a computer sitting in production and then let the analysis happen on…
  • SEGGER - Nino -

    Replied to the thread How to use precompiled libraries.

    Post
    Hello Roger, Thank you for your inquiry. The Additional Input Files approach is the correct one. From the error message it appears that the target device you are using does not have a floating point unit but with the library you are trying to generate…
  • Hello, Good to hear that connection is working now. J-Link Remote Server has only a timeout if server replys take longer than 5 s. So if the ping between Client->Tunnel->Remote Server is more than 5 seconds it can come to timeouts but only after a…
  • SEGGER - Nino -

    Replied to the thread Error starting process.

    Post
    Hello, Thank you for your inquiry. Your gcc path in Embedded Studio has a mix of backward and forwardslashes. Try using forwardslashes only. Does it work then? Best regards, Nino
  • Hello, Thank you for your inquiry. Such an issue is not known to us. Could you provide the serial numbers of the J-Links you are using? Are you using the remote server in tunnel mode or in local LAN? How is your connection sequence? - J-Link1…
  • Hi, I'm trying to flash an external flash (Norflash sst39vf3201C) with Jlink Plus and Jflash but it always return the same error: - ERROR: Programming failed @ address 0x9000000 (item verification error) I recently noticed that the Norflash fitted on…
  • SEGGER - Fabian -

    Replied to the thread Jlink base probe can't connect LPC55s69 1B.

    Post
    Hi, Thank you for your inquiry. Please note this is not a support forum, but a community forum. For more information please refer to my signature. Regarding your issue: There is no issue known to us regarding the LPC55S69 series. I am not entirely…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Use -include in project.

    Post
    Hello, Thank you for your inquiry. We received your inquiry via our support system in parallel. We will continue discussion there as you are in valid support period and this thread will be closed. Please try to stick to one communications channel in…
  • pyang -

    Replied to the thread [SOLVED] Use -include in project.

    Post
  • SEGGER - Fabian -

    Replied to the thread JLink Supported STM32F051x4 MCU.

    Post
    Hi Mehmet, Thank you for your inquiry. The "x" is just a place holder for a letter or for a number (in this case a letter). There are multiple STM32F051x4 devices, we do support: forum.segger.com/index.php/Att…a0f113351c97b971ce7839558 Does this answer…
  • SEGGER - Fabian -

    Replied to the thread JlinkExe erase Command fails with RAM check.

    Post
    Hi, Thank you for your inquiry. Such an issue is not known to us. Our Cortex-M Trace Reference Board uses the same chip and there have been no issues reported. It is most likely that this issue is connected to your custom board. Do you experience the…
  • awneil -

    Replied to the thread Start with SES stm32f103vc.

    Post
    Does the code build? If yes, Can you download it? If yes, Does it run? Can you use the debugger to see what's happening ?
  • awneil -

    Replied to the thread [SOLVED] Use -include in project.

    Post
    can you be more specific? eg, link to the GCC documentation of that option
  • grobot -

    Posted the thread How to use precompiled libraries.

    Thread
    Hi, I'm a new user of Embedded Studio using it mainly for Nordic Semiconductor BLE devices. Now I'm trying to add the BSEC library from Bosch Sensortec to my project. But it won't work. The BSEC is a precompiled library which I added here: Project
  • icwiener -

    Posted the thread Ozone Data Sampling Number Formatting Inconsistent.

    Thread
    Hi, Ozone 3.10d here. In the Data Sampling view the numbers formatting is inconsistent. The small gap for thousands is there for some columns but e.g for the Average column, it is missing. The Changes column is weird as well. See screen shot. Best…