Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Francois C. -

    Replied to the thread [SOLVED] J-Link: VTREF has to be powered on at each start.

    Post
    Thanks Nino. It is working, we can close the ticket.
  • Diguino -

    Replied to the thread LcdWriteDataMultiple function sends only one line of frame each time..

    Post
    Hi Sven, Thanks for the answer. This will solve things in my mind highly. I will try. But before trying, I want to ask you another question. After LCD_ControlCache(LCD_CC_UNLOCK), dma will transmit data to LCD. I think time for transmitting data is…
  • mringwal -

    Posted the thread Feature Request RTT: SEGGER_RTT_GetAvailWriteSpace.

    Thread
    Hi! We're using RTT to write out a binary packet log file (e.g. like .pcap). To avoid using a special outgoing packet buffer and extra memcpy calls, we first write the packet header and then the packet itself with SEGGER_RTT_Write. If the RTT buffer…
  • cowens -

    Replied to the thread [SOLVED] Pass ID CODE verification via command line.

    Post
    No more questions, thanks.
  • Pieter Eggermont -

    Replied to the thread ProgBar - Fill bar.

    Post
    Hi Florian, Agreed that my code example above was not the best of its kind.. Was just to have a working demo :) Beside the inValidate call that I was missing, I also setted your code structure and works like a charm! Thanks! :D :D :D
  • SEGGER - Nino -

    Replied to the thread JLink EDU and Renesas HEW and E2 Studio.

    Post
    Hello, Thank you for your inquiry. Quote from cymatics: “I'm really disappointed at the lack of input (and perhaps, concern) from Segger (and Renesas) on this issue. ” Sorry to hear that but you opened the thread out of our office hours with a…
  • SEGGER - Florian -

    Replied to the thread ProgBar - Fill bar.

    Post
    Hi Pieter, the clipping rectangle you set doesn't work, because of that most of the blocks don't get drawn. It worked for me when I called WM_InvalidateWindow() after each loop that increases the progbar value. Also, try this to draw your blocks: C…
  • Pieter Eggermont -

    Replied to the thread ProgBar - Fill bar.

    Post
    I have found the solution. After I was setting the value of the progress bar, I should also trigger WM_InvalidateWindow. Works fine now! :) Source Code (2 lines)
  • SEGGER - Florian -

    Replied to the thread emwin - GUI_LANG_LoadCSVEx loading different CSV files.

    Post
    Hi, could you tell me which emWin version that is? The version number is located in the file GUI_Version.h. And could you also send me your application and the CSV files, as well as the files GUI_Conf.c and LCD_Conf.c so I can accurately try to…
  • Sysmop226 -

    Replied to the thread emwin - GUI_LANG_LoadCSVEx loading different CSV files.

    Post
    Hi, Im using the Library of ST on my STM32H7 MCU. Library version: STemWin_CM7_wc32_ot_ARGB. This issue is a blocker for me ;( . I'd be glad if there are any ideas of the source of the issue. Thanks.
  • SEGGER - Schoenen -

    Replied to the thread STM32F746G-Discovery.

    Post
    Hi, you could overwrite the button callback function or set a custom skinning function. When it comes to drawing the button text you can display the string rotated with the function GUI_DispStringInRectEx(). C Source Code (119 lines) It is not possible…
  • Hi, You are using a a driver version without cache, GUIDRV_FLEXCOLOR_M16C0B8. Without a cache the GUIDRV_FlexColor driver allocates a buffer to hold one line. Therefore it can only send one line at once. You are using a memory device but it also gets…
  • lukma -

    Replied to the thread Relocate symbols in OZONE.

    Post
    Hi Nino, Thanks for pointing me to Ozone "Commands" in the Console as I was not aware of it. Best regards, Łukasz
  • SEGGER - Nino -

    Replied to the thread RTOS plugin when no GDBServer used ( = IDE / tool uses jlink dll ).

    Post
    Hi, If I understand you correctly you are looking to port the RTOS awarness to other IDEs/debuggers? Is that correct? In that case the interfacing with the J-Link library is generic and only a read and write function is called. Everything else is…
  • VANAJA -

    Posted the thread processor frequency.

    Thread
    Respected sir, I am working with RISCV-ISA and its variants RV32IMAF, RV32IMAFC. May I know what is its operating frequency of the respective processor variants? Thanks in advance
  • Andrzej -

    Replied to the thread STM32F746G-Discovery.

    Post
    Thank you! How do you flip the button 90 and the text on it?
  • Diguino -

    Posted the thread LcdWriteDataMultiple function sends only one line of frame each time..

    Thread
    I designed a custom board with STM32F413RH and 4DOLED-282815 display. Oled display has 128x128 pixel. I think ram is enough to use stemwin because STM32F413RH has 320 KB RAM and 1.5MByte Flash. I want to use stemwin without OS. I rearranged…
  • Pieter Eggermont -

    Posted the thread ProgBar - Fill bar.

    Thread
    Hi, My progress bar is filling strange .. You can see the progress bar running in the movie (uploaded via YouTube): ProgBar Movie or check the image (progab_filling_strange.png) below C Source Code (38 lines) In my Paint function of the active Window,…
  • SEGGER - Nino -

    Replied to the thread Relocate symbols in OZONE.

    Post
    Hello, Thank you for your inquiry, To move symbols to another location you can use command Project.RelocateSymbols. How to use it is explained in the Ozone user manual. Section "" Scripting Interface shows a sample on how to do it with a bootloader…
  • SEGGER - Florian -

    Replied to the thread emwin - GUI_LANG_LoadCSVEx loading different CSV files.

    Post
    Hi Sysmop226, I have tried to reproduce this with an array like you said, with an even bigger file and less target memory than the file size, but it still worked fine. Even with an older version (5.48) from before something in the GUI_LANG module was…