Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Nino -

    Replied to the thread Ozone ETM trace limit.

    Post
    Hello, Quote from rabbitlennon: “If I buy SDK now, can I get a free update with that feature? ” J-Link SDK comes with 6 months of free updates. After that the license needs to be renewed. Quote from rabbitlennon: “Any way to give a distinct…
  • SEGGER - Nino -

    Replied to the thread Timestamp from PC.

    Post
    Hello Bar, Thank you for your inquiry. You have several options here. 1. Arm Semihosting with operation SYS_TIME. 2. Create an IO option on your target device that shows as com port. If you want to do this in software and your target device has USB you…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Ozone on debian buster segfault.

    Post
    Hello, Great to hear that you are up and running again. We will consider this thread as solved now. Best regards, Nino
  • Le0 -

    Replied to the thread STM32 and mass erase.

    Post
    Hello. I double checked and couldn't really find any instance where we would randomly change these bytes. Is JLinkExe looking just at these option bytes or others also? Bits 7:0 RDP: Read protection level0xAA: Level 0, read protection not active0xCC:…
  • Kusum Swarankar -

    Replied to the thread Cursor is not moving if only space is entered.

    Post
    HI, This is not the problem. I was using the cursor right aligned so i was not able to see the space taking. Thank you.
  • bar -

    Posted the thread Timestamp from PC.

    Thread
    Simple question. Is there a way to get a timestamp, directly from the PC threw the debugger, or the com port? I want to use it to start a RC calander RThanks Bar.
  • Timur -

    Posted the thread J-Link RTT output completely stops working after running for a long time.

    Thread
    Our project uses an EFM32WG940F256 microcontroller on a custom board. This board is connected via SWD to a J-Link device, which is connected via USB to a computer that runs Linux. We have a relatively big "bare-metal" program on the MCU which outputs…
  • Kusum Swarankar -

    Posted the thread Cursor is not moving if only space is entered.

    Thread
    Hi, I have created one alphanumeric keypad window. it has edit widget. if i am typing only space here i.e first input itself is space and continue typing space, cursor is not not moving. but internally it is storing in the edit buffer. whereas if i type…
  • billium -

    Replied to the thread [SOLVED] Ozone on debian buster segfault.

    Post
    Hello Nino Thanks a lot for this. Yes it works in both the Ozone terminal and the standalone viewer. After trying this I found I had my system clock wrong. I think that it worked in the standalone SWO viewer made me think the STM32 settings were…
  • rabbitlennon -

    Replied to the thread Ozone ETM trace limit.

    Post
    Quote from SEGGER - Nino: “You can get around this by exporting the instruction trace data after each stop. This can also be automated. See here for more details: wiki.segger.com/Automated_Tests_with_Ozone ” Thanks for the guide. I used…
  • 40490FDB -

    Replied to the thread SAMA5 ETB trace.

    Post
    I have two SAMA5D2 Xplained boards, tried them both. I have tried all combinations of open and closed JP1 and JP2. I have installed Ozone on another PC, still not working. I also have two SOM1-EK dev kits, might try running the trace example on…
  • Bit -

    Replied to the thread TTF FONT issue?.

    Post
    Hi, Look at your picture, like the simulator used. The simulator is normal, the microcontroller display is abnormal. Using other fonts also has the same problem. Attach a font file. thanks a lots.
  • rabbitlennon -

    Replied to the thread Ozone ETM trace limit.

    Post
    Quote from SEGGER - Nino: “2: Currently not possible. ” If I buy SDK now, can I get a free update with that feature?
  • SEGGER - Nino -

    Replied to the thread Ozone ETM trace limit.

    Post
    Hello, 1: No, you can use your current J-Trace PRO. It will be launched with a J-Link software release which are available for free so you just need to install the latest software when it is available. 2: Currently not possible. Best regards, Nino
  • rabbitlennon -

    Replied to the thread Ozone ETM trace limit.

    Post
    Hi Nino, Thanks for the reply. Quote from SEGGER - Nino: “We are currently working on expanding Ozone and J-Trace PRO so you can select to buffer more data into either your host PCs RAM or to one or multiple trace files. ” 1: Do I need a new J-Trace…
  • SEGGER - Nino -

    Replied to the thread Internal flash memory erased using J-Link Commander.

    Post
    Hello, Thank you for your inquiry. If you issue a simple erase command with J-Link Commander or Embedded Studio and similar it will erase all internal Flash Banks. This includes the BootROM for this device as it is configurable. If you are debugging…
  • awneil -

    Replied to the thread Internal flash memory erased using J-Link Commander.

    Post
    Quote from japa: “I am using Cortex M4 EFM32 Pearl gecko chip (EFM32PG12B500F1024GL125) to write and read a configuration file using J-Link Commander ” I don't really understand what you mean by that - please explain further. A diagram might…
  • SEGGER - Nino -

    Replied to the thread Ozone ETM trace limit.

    Post
    Hello, Thank you for your inquiry. J-Trace PRO will currently buffer instruction trace data up to 64 MB (depending on your target device this can be more or less than 67M datapoints). We are currently working on expanding Ozone and J-Trace PRO so you…
  • SEGGER - Nino -

    Replied to the thread Jlink SDK ETM and ITM support.

    Post
    Hello, Thank you for your inquiry. Correct, different data channels would be trace pins, trace buffer and SWO. Only one can be evaluated at a time. But ETM and ITM packets can be channeled through the trace pins at the same time. This has to be…
  • SEGGER - Schoenen -

    Replied to the thread TTF FONT issue?.

    Post
    Hi, I gave it a try but on my end seems to be ok. I tested with both, V5.44 and the most recent one V5.50b. Attached are some screenshots. Unfortunately, I don't have the same font, so I can not say if this is related to the font. I used Noto Sans…