Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • v01d -

    Replied to the thread RTOS plugin when no GDBServer used ( = IDE / tool uses jlink dll ).

    Post
    Hi Nino, Quote: “..... The GDB Server plugin is not compatible to Ozone or ES as the GDB Server has to use another approach due to the limitations of the GDB Protocol. So you can only use the available plugins from us in third party IDEs if the IDE…
  • v01d -

    Replied to the thread Relocate symbols in OZONE.

    Post
    Quote from lukma: “... I would like to do it without any breakpoints set (HW or SW). Just break the execution of the code (at some random place), load symbols with offset - inspect the code and just resume execution. ” This seems a little…
  • SEGGER - Nino -

    Replied to the thread RISCV base timing information.

    Post
    Hello, Thank you for your inquiry. Could you elaborate what cycle count you are referring to? Currently Embedded Studio does not implement a cycle counter display for RISC-V. If you use a simulator project instead running on actual hardware we display a…
  • Sauci -

    Replied to the thread Unable to write to ECC flash on tms570lc4357 device.

    Post
    Hello, Any new about this thread? Best regards, Guillaume
  • SEGGER - Nino -

    Replied to the thread [SOLVED] JLink EDU and Renesas HEW and E2 Studio.

    Post
    Hello, Quote from cymatics: “However, i was never able to get a successful upload of my code to the processor and get it running. ” This is why we suggest trying it with the Commander first. If you can download and debug in the Commander, J-Link…
  • LexaGb -

    Posted the thread Snapping time in a window motion.

    Thread
    Hello, I'm working on a custom widget that would use motion (sort of horizontal listwheel or swipelist). And I'd like to reduce time for snapping the items to the snap position just like listwheel widget does . As far as I understand there is a…
  • sridhar6994 -

    Posted the thread font size is 256x32,256x64 etc.

    Thread
    Hi currently I am working on TFT projects,It invovles fonts for text and number. default font size given are 256x8,256x16 but i need more size in fonts.So please give your suggestions to proceed further.
  • sridhar6994 -

    Posted the thread 7 inch TFT image not clear even for sample code.

    Thread
    Hi I have made images to be visible in TFT using sample codes from github for nuvoton I am using N9H30 series evaluation board,In this series I have dumped only sample code but that image is also not good.And secondly the frame window is moved a little…
  • Diguino -

    Replied to the thread LcdWriteDataMultiple function sends only one line of frame each time..

    Post
    Hi Sven, I changed driver command with cache as GUIDRV_FlexColor_SetFunc(pDevice, &PortAPI, GUIDRV_FLEXCOLOR_F66722, GUIDRV_FLEXCOLOR_M16C1B8); I tried test code…
  • cymatics -

    Replied to the thread [SOLVED] JLink EDU and Renesas HEW and E2 Studio.

    Post
    Hi Nino, Thank you for your reply. I'm aware that the Edu model comes without support, so i regret and apologize for my earlier statement. I was so frustrated when i wrote it. Again, apologies. I was able to manipulate the processor's IO registers…
  • htsmith19 -

    Posted the thread DropDown Widget Problems.

    Thread
    Hi, I'm using a DropDown widget and have added 3 strings to the widget ("PA", "PSI", "BAR"). The dropdown expands and closes just fine, however when I select the last option (BAR) and re-open the widget, it appears like the items have all shifted up one…
  • Andrzej -

    Replied to the thread STM32F746G-Discovery.

    Post
    Thank you!
  • Francois C. -

    Replied to the thread [SOLVED] J-Link: VTREF has to be powered on at each start.

    Post
    Thanks Nino. It is working, we can close the ticket.
  • Diguino -

    Replied to the thread LcdWriteDataMultiple function sends only one line of frame each time..

    Post
    Hi Sven, Thanks for the answer. This will solve things in my mind highly. I will try. But before trying, I want to ask you another question. After LCD_ControlCache(LCD_CC_UNLOCK), dma will transmit data to LCD. I think time for transmitting data is…
  • mringwal -

    Posted the thread Feature Request RTT: SEGGER_RTT_GetAvailWriteSpace.

    Thread
    Hi! We're using RTT to write out a binary packet log file (e.g. like .pcap). To avoid using a special outgoing packet buffer and extra memcpy calls, we first write the packet header and then the packet itself with SEGGER_RTT_Write. If the RTT buffer…
  • cowens -

    Replied to the thread [SOLVED] Pass ID CODE verification via command line.

    Post
    No more questions, thanks.
  • Pieter Eggermont -

    Replied to the thread ProgBar - Fill bar.

    Post
    Hi Florian, Agreed that my code example above was not the best of its kind.. Was just to have a working demo :) Beside the inValidate call that I was missing, I also setted your code structure and works like a charm! Thanks! :D :D :D
  • SEGGER - Nino -

    Replied to the thread [SOLVED] JLink EDU and Renesas HEW and E2 Studio.

    Post
    Hello, Thank you for your inquiry. Quote from cymatics: “I'm really disappointed at the lack of input (and perhaps, concern) from Segger (and Renesas) on this issue. ” Sorry to hear that but you opened the thread out of our office hours with a…
  • SEGGER - Florian -

    Replied to the thread ProgBar - Fill bar.

    Post
    Hi Pieter, the clipping rectangle you set doesn't work, because of that most of the blocks don't get drawn. It worked for me when I called WM_InvalidateWindow() after each loop that increases the progbar value. Also, try this to draw your blocks: C…
  • Pieter Eggermont -

    Replied to the thread ProgBar - Fill bar.

    Post
    I have found the solution. After I was setting the value of the progress bar, I should also trigger WM_InvalidateWindow. Works fine now! :) Source Code (2 lines)