Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • SEGGER - Florian -

    Replied to the thread GUI_TIMER_Create.

    Post
    Hi Pieter, window timers still do its job when you use multiple windows. You can create and react on timers with different windows, you just need the window handle the timer will be attached to. What applies for both kinds of timers, is that you still…
  • Pieter Eggermont -

    Replied to the thread GUI_TIMER_Create.

    Post
    Hi, I have different windows (multiple pages system) so using a window timer is no option for me. It works now because I defined the time before the main loop once. When I than restart the timer this is working. The case that was not working is…
  • Dear Community, I need to tune the default reset sequence (executed thereafter with 'mo reset'). The problem: ------------------- Stop SoC (i.MX6Q) just after powering it up (in the early SRAM - 0x908000 address in this case). This is necessary for…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Forum as non support? How about your sale description.

    Post
    Hello, Thank you for your feedback. Quote from v01d: “I find this is nonsense as far as 'not a support forum' goes. Please look on what is printed on the page inside of my purchased Segger J-Link EDU unit, see photo attached. ” Good catch. The EDU…
  • sridhar6994 -

    Replied to the thread images to .DAT files creation using emwin.

    Post
    attachments not supported in previous comments sorry for that messages
  • sridhar6994 -

    Replied to the thread images to .DAT files creation using emwin.

    Post
    attachments
  • sridhar6994 -

    Replied to the thread images to .DAT files creation using emwin.

    Post
    hi Florian Thanks for your reply Actually i can able to create .dta files as you said by selecting the extension. But in my code I am having .DAT files only as I have attached.
  • SEGGER - Florian -

    Replied to the thread GUI_TIMER_Create.

    Post
    Hi Pieter, you have to set a period for the timer using GUI_TIMER_SetPeriod(). Once you did so, calling GUI_TIMER_Restart() will restart that timer with the set period. By the way, when using windows, you might want to use the timer API that is part of…
  • Pieter Eggermont -

    Replied to the thread GUI_TIMER_Create.

    Post
    ok have new results ... What I did on second log in, I've deleted the timer and re-inited it again. this was not working properly in the second time I try to use that timer.. I now init it once, set the time period and just use the restart when I need…
  • Pieter Eggermont -

    Replied to the thread Widget Edit display unexpected length string.

    Post
    Hi, What also could be happening is that the full text is indeed visibile at init but after drawing that text, another widget is drawn over the position of the chars '89abc' . When adding those chars in the PAINT or EDIT or other function after INIT,…
  • SEGGER - Florian -

    Replied to the thread Widget Edit display unexpected length string.

    Post
    Hi Ross Lee, can you tell me what maximum length you set to the EDIT widget when you create it? EDIT_SetMaxLen(hItem, 1000); could fail due to not enough memory being available. Best regards, Florian
  • Pieter Eggermont -

    Posted the thread GUI_TIMER_Create.

    Thread
    Hi, I'm creating an access code window. When entering the correct code, I start a timer which will go off after 60 seconds when no key press was done so the logged in user is logged out again. when entering the code I create following timer: C Source…
  • volodymyr -

    Replied to the thread MULTIPAGE: issue #2 of non-focusable page.

    Post
    Quote from SEGGER - Florian: “just add a button to your dialog with the non-focusable widgets and hide it using WM_HideWindow() ” Hi Florian. Thank you, it really helped.
  • lukma -

    Posted the thread Relocate symbols in OZONE.

    Thread
    Dear community, I would like to ask about using Ozone SW (ver. 2.70.3 - 64 bit Debian) with debugging U-Boot. U-Boot itself work with two sets of "locations". One matches the address set of u-boot elf binary just after starting it from SPL (or loading…
  • SEGGER - Florian -

    Replied to the thread images to .DAT files creation using emwin.

    Post
    Hi sridhar6994, emWin doesn't support .DAT files. Maybe you mean .DTA files? .DTA is a streamed bitmap format. You may save images in the .DTA format using the Bitmap Converter, click "File->Save As" and select the .DTA file format. Best…
  • SEGGER - Florian -

    Replied to the thread emwin - GUI_LANG_LoadCSVEx loading different CSV files.

    Post
    Hi Sysmop226, I've tried to reproduce your error, but it worked fine for me. And yes, file size shouldn't matter with GUI_LANG_LoadCSVEx() as this function only gets size and file offset of the text locations. Have you checked if the file handle you…
  • sridhar6994 -

    Posted the thread images to .DAT files creation using emwin.

    Thread
    hi every one I am currently working in nuvoton N9H30 series evaluation board.In 2D sample codes ,I am having so many .DAT files which is working.These .DAT files have hex code for the image RGB888. I don't know how they created that .DAT files for…
  • sridhar6994 -

    Posted the thread images to .DAT files creation using emwin.

    Thread
    hi every one I am currently working in nuvoton N9H30 series evaluation board.In 2D sample codes ,I am having so many .DAT files which is working.These .DAT files have hex code for the image RGB888. I don't know how they created that .DAT files for…
  • Huytyskland -

    Replied to the thread Program Flash on STM32L4R9 using J-Link Commander.

    Post
    I solved the issue already. I just chose a wrong device.
  • v01d -

    Posted the thread [SOLVED] Forum as non support? How about your sale description.

    Thread
    On one (or few) of my threads, one of Segger's moderators or support, replied to my questions with : Quote: “This is still *not* at support forum! Please familiarize yourself with the forum rules before posting ” I find this is nonsense as far as…