Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • gaurav -

    Posted the thread Extra background color.

    Thread
    Hi, I am using functions given below to display a string with background color. I want background color length corresponding to string length but in the end of string some extra length ( 1 character) of background color is coming. Please suggest…
  • ankit_knit -

    Posted the thread How to Rotate Bitmap Image via emWin library.

    Thread
    I want to rotate a Bitmap Image using emWin library. In APIs only linear translation is possible as Bitmap can be display from given location but how to rotate ?
  • rabbitlennon -

    Replied to the thread ETM on LPC55S69 EVK board.

    Post
    Currently, Ozone reported the following coresight components: CoreSight components: ROMTbl[0] @ E00FE000 ROMTbl[0][0]: E00FF000, CID: B105100D, PID: 000BB4C9 ROM Table ROMTbl[1] @ E00FF000 ROMTbl[1][0]: E000E000, CID: B105900D, PID: 000BBD21…
  • jev -

    Replied to the thread 'Always Rebuild' - not quite what I wanted..

    Post
    You could create a small tool (read: a shellscript, a python program or whatever your favorite poison is) that generates a unique timestamp in a headerfile that is included in your software. Run that in each build. That's how I do it. However, be aware…
  • rabbitlennon -

    Posted the thread ETM on LPC55S69 EVK board.

    Thread
    Hi there, I have a LPC55S69 EVK board and wanted to use the Jtrace to get the instruction trace. Since no trace pin is available on the board, I thought setting trace source to be "trace buffer" should work. Unfortunately, it is not allowed in OZone. I…
  • steve2641 -

    Replied to the thread Ozone ELF Loading Time.

    Post
    We were using Ozone 2.60. I downloaded and tried the latest, 2.62 and, WOW!, so much faster. What used to take 6-8 minutes to load is now loading in <10 seconds. Such a great improvement. Thanks!
  • LexaGb -

    Replied to the thread Fixed widget for all windows.

    Post
    Hello, three ways come to mind: 1. Placing your fixed widgets in one of the windows (also in GUIBuilder). When you go to the other page (if using MULTIPAGE widget) or just change a window then you can reattach these fixed widgets to the new selected…
  • HOSSEIN_TOMARI007 -

    Posted the thread Fixed widget for all windows.

    Thread
    In my project, inside the window there are fixed widgets that are inside all pages. For example, time and date, and I create the windows with a guibuilder. Do I need to add a widget for the date or time for each page? Is there a better solution? :?: :?:
  • env181025 -

    Posted the thread time related functions in debugio.h.

    Thread
    debug_time is very useful and it would be even more useful if you could please consider implementing the complementary functions debug_localtime_r and debug_strftime. Thanks.
  • rajdidaj -

    Replied to the thread Cannot select the correct Kinetis target in a JTAG chain.

    Post
    I was using j-link v6.46h for this. I'll try with v6.48b.
  • awneil -

    Posted the thread 'Always Rebuild' - not quite what I wanted..

    Thread
    It is a common requirement to have a build time & date included in the executable. An easy way to do this is to have a file with something like C Source Code (2 lines)But, for that to work, it has to be re-compiled every time the project is…
  • Damon Kelly -

    Replied to the thread Window/desktop layout.

    Post
    Both .emSession files have different time stamps (correct -- when each project was closed), but the layout still returns to the last closed.
  • awneil -

    Posted the thread 'Debug Terminal' (RTT) Window - log to file?.

    Thread
    In the standalone RTT Viewer, it is possible to set it to record to a file. Is this possible for the 'Debug Terminal' Window inside SES ? If so, how?
  • SEGGER - Alex -

    Replied to the thread [SOLVED] MEM_MAP.c error with STM32G071.

    Post
    Correction: It was a problem in the J-Link SW that has been fixed in recent versions (V6.48 and later). There was an internal misunderstanding. It was not a problem on the IAR EWARM side.
  • awneil -

    Replied to the thread Window/desktop layout.

    Post
    Did you check for .emSession files being created/updated ?
  • awneil -

    Replied to the thread Need output in Verilog format.

    Post
    Quote from seggfreddy: “binary must be in Verilog-format ” What do you mean by that? Surely, binary is just binary? ?(
  • SEGGER - Nino -

    Replied to the thread [SOLVED] loadbin to QSPI Flash on NXP K81 fails.

    Post
    Hello Denis, Great to hear that you are up and running again. As you correctly found out there is a big difference between selecting the generic k81 device name and the one allow setting the security bits. I assume that by using the latter some of the…
  • SEGGER - Nino -

    Replied to the thread Ozone ELF Loading Time.

    Post
    Hello, Thank you for your inquiry. Long load times in Ozone usually result from complex nested symbol information in the elf file which can sometimes appear "suddenly" even if the code change was small, the compiler output hower has changed…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Atollic/Eclipse J-Link cannot open listener port.

    Post
    Hello, Thank you for your inquiry. We received your inquiry via our support system as well. To make sure no data gets lost this thread will be closed now. Information for others who end up here: The issue seems to have been related to the host PC. It…
  • thank you very much!【problem have been solved】First get parent window(dialog box) handle hWinPicture = GUI_CreateDialogBox,second use the handle in the child window hItem = WM_GetDialogItem(hWinPicture, GUI_ID_LISTVIEW1); The rigorous style of…