Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • iotexpert.com -

    Posted the thread BitPlains and LCD_GetVRAMAddr.

    Thread
    I am using the BitPlains driver. In LCD_X_Config I call LCD_SetVRAMAddrEx(0, (void *)&_VRAM_Desc); And every works... fine However, calls to LCD_GetVRAMAddr and LCD_GetVRAMAddrEx return 0. Is that expected? If so that is too bad because it means I…
  • Dan M -

    Posted the thread Keil uVision μVision - No Algorithm found for: 20000000H - 200000C7H.

    Thread
    Hello, I am working on some programming for an STM32F072RB and I am a bit new to ST chips and uVision so please bare with me. :) When I download the program via a JLink Plus to the STM32 the build output shows the following error: Source Code (17…
  • SEGGER - Nino -

    Replied to the thread Jtrace on NuMaker PFM-M2351.

    Post
    Hello, You can find the M2351 trace example here now: wiki.segger.com/M2351#Tracing_on_Nuvoton_M2351 Best regards, Nino
  • ekodeddy -

    Replied to the thread JTAGLoadExe Exit Code:-11.

    Post
    Just to add, the exact failure return is "segmentation fault: 11"
  • SEGGER - Nino -

    Replied to the thread svd file for STM32WB55.

    Post
    Hello Brian, Thank you for your inquiry. SVD files are provided and maintaned by the CPU manufacturer. In this case ST support would be correct contact for it. Best regards, Nino
  • Mark_C -

    Replied to the thread Partial visualization of a bitmap / multilayer bar graph.

    Post
    Quote from LexaGb: “Hello, maybe we should place two scales (gray and colored) at one position in an exact matching using IMAGE widgets. Then invalidate colored bar image within the area related to the bar value using WM_SetUserClipRect()
  • Danny -

    Posted the thread I import a project file from IAR to SES. But when I build, SES has errors.

    Thread
    Hello I received aproject file created by IAR. But I don't havean IAR program, so I imported it from IAR to SES And when I builtit, an error occurred Should IARprograms be installed when importing? Ask for help whatto do.
  • Damon Kelly -

    Replied to the thread Window/desktop layout.

    Post
    Quote from SEGGER - Nino: “The emSession file will be update once a solution/project is closed or Embedded Studio is closed. ” Yes indeed it does, but when I open a different emProject, SES seems to use the last used window layout, not the one from the…
  • bpeavey -

    Posted the thread svd file for STM32WB55.

    Thread
    Hi, I'm using Ozone with a J-Link probe to connect to a STM32WB55 Nucleo board. For other Nucleo boards, I have been able to search online for the appropriate .svd file to use for my target MCU. However, I'm unable to find a svd file for the…
  • boydy -

    Posted the thread BMP Slow to render unless layer rotation is set.

    Thread
    Hi I am rapidly learning my way through the emWIN system, with good results so far. I am using a STM32F7 device running at 216MHz, with a 320,240 RGB888 display on the integrated LTDC. The system is set up as a COLOR_MODE_RGB888 with only 1 layer. I…
  • Achim O. -

    Posted the thread SES 4.20a: g++ compiler error from "offsetof".

    Thread
    Hello, I am evaluating SES 4.20a. I had a similar issue some weeks ago with SES 4.18 but didn't investigate further because there was no free time then. Trying to compile the following source code: C Source Code (20 lines) I get this from the…
  • wittich -

    Replied to the thread program Cortex-M4 processor with 2 Xilinx FPGAs in JTAG chain.

    Post
    Hi, so if no one has any suggestions, can anyone give me more generic advice or experience with the combination of a JTAG chain of ARM (non-Zynq) + FPGA using SEGGER tools? Any hints or comments would be appreciated. Even an appropriate eval board I…
  • LexaGb -

    Replied to the thread LISTWHEEL background loses transparency.

    Post
    Yes, GUI_MAKE_COLOR is doing its job, but if I assign the ARGB-image to the IMAGE widget then the image in GUIBuilder looks like red and blue are swapped :) . Alex.
  • gaurav -

    Replied to the thread Extra background color length.

    Post
    I am attaching font converter. Please check. When you run .exe file it will open. One pop up window will come whatever default settings are there use same settings. Font Verdana Font Size 35 Save this file as a .c file. Regards Gaurav
  • SEGGER - Schoenen -

    Replied to the thread LISTWHEEL background loses transparency.

    Post
    Hi, the GUIBuilder should wrap color values with a macro like: GUI_MAKE_COLOR(0x000000FF) // Red This macor converts the given ABGR value into the proper byte order. Regards, Sven
  • awneil -

    Replied to the thread Extra background color length.

    Post
    There are many "font converters" on the internet - which one, specifically, did you use? Give a link.
  • volodymyr -

    Replied to the thread WM_SetUntouchable.

    Post
    Quote from SEGGER - Schoenen: “Hi, OK, now I got it, I guess. Try this: In WM_INIT_DIALOG of _cbDerivedDialog() I create another window which is transparent. This window will catch the input outside _cbDerivedDialog() and do nothing with it. After…
  • st0ne -

    Replied to the thread Some Keys not working correctly with NEO2 Keyboard Layout.

    Post
    Hi, ok, i have solved the problem now and write here if others have the same problem. I talked to neo2 guys in IRC and the problem here is with QT. So the problem should exist on other QT apps as well. The solution is to use the QUERTZ driver and…
  • LexaGb -

    Replied to the thread LISTWHEEL background loses transparency.

    Post
    Ok, Sven, thanks for clarifying, but one thing stops me from using ARGB. It is GUIBuilder that works in ABGR mode :) . So the colors look incorrectly. I got used to it for creating dialogs. Alex.
  • gaurav -

    Replied to the thread Extra background color length.

    Post
    Hi, I am sending .c file of verdana font and GUI.h file. Font converter is freely available on internet. You can download from there. Regards Gaurav