Recent Activities

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Hello, Thank you for the response! >Please not that this is *no* support forum! Also the J-Link that you are using is out of support period for over a year. So please understand that we can't offer prioritized assistance in such a case... Wow! I…
  • Hi Nino, Many, many thanks for saving me much time on this! Kevin
  • Hello, Please not that this is *no* support forum! Also the J-Link that you are using is out of support period for over a year. So please understand that we can't offer prioritized assistance in such a case... The dropping of data over Channel 1 with…
  • Hello Kevin, Thank you for your inquiry. We use the Samtec FTSH-110-01-F-DV in our designs. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [J-Trace] [Texas Instruments AM335x] Compatibility.

    Post
    Hello, Thank you for your inquiry. Generally that target device should be tracable with our J-Trace PRO Cortex probe. Could you name the S/N of your probe for verification? For that particular device we do not have a trace example project yet so you…
  • SEGGER - Nino -

    Replied to the thread linker creates loadable section even when I say load ="no".

    Post
    Hello, Thank you for your inquiry. It is correct that the linker will create a section there, but it will not be downloaded. It is just information for the linker not to place code there. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Cylic Update of local/global variables.

    Post
    Hello, Great to hear that you are up and running again. This thread will now be marked as solved. Best regards, Nino
  • SEGGER - Nino -

    Replied to the thread Profiling CortexM0 with Ozone.

    Post
    Hello, Thank you for your inquiry. Cortex-M0 devices unfortunately lack any kind of hardware tracing capability. That is why nothing happens in Ozone. Optional trace features are implemented in Cortex-M0+ and higher. Nonetheless we provide SEGGER RTT…
  • SEGGER - Nino -

    Replied to the thread [SOLVED] Stack pointer is setup to incorrect alignment.

    Post
    Hello Peter, Good to hear that you are up and running again. It appears that I-Jet simply ignores the error and works around it. We on the other hand will tell you if the IDE tells J-Link something "illegal" to do ;) This thread will be marked as solved…
  • Karim -

    Replied to the thread Polygon Rotation.

    Post
    Thank you Alex. I think I got. The pivot point is set by how we define the polygon points. Thank you very much about that sample code and your guidance.
  • LexaGb -

    Replied to the thread Polygon Rotation.

    Post
    Yes, we could say that, I suppose. I would say, the term of the origin point is applicable when drawing the polygon. Rotation of the polygon is doing in relative coordinates. When we are drawing rotated polygon we set the origin point again for drawing…
  • Karim -

    Replied to the thread Polygon Rotation.

    Post
    Thank you Alex. It was a very good sample code. As I understood we can set the origin point by using GUI_DrawPoint() function. And after that the rotation will be done according to that point. Did I understand correctly?
  • LexaGb -

    Replied to the thread Polygon Rotation.

    Post
    Hello, the coordinates of polygon are considered related to the origin point when drawing the polygon. When rotating the polygon the origin point is the pivot point of the polygon that can be inside and outside the polygon depending on its…
  • PeterSp -

    Replied to the thread [SOLVED] Stack pointer is setup to incorrect alignment.

    Post
    Thank you Nino for your hint. The IAR support let me check the linker file. There I found a definition for the 'Initial Supervisor SP' (VECTOR_000) evaluating to 0x20003FF7. But the initial SP must be 8-byte aligned. Observing this rule solves the…
  • Karim -

    Posted the thread Polygon Rotation.

    Thread
    Hello I have a simple question about polygon rotation, that I couldn't find the answer in reference manual. I want to know what is the origin point of rotation in function GUI_RotatePolygon? I mean this function rotates the polygon around to which…
  • SEGGER support team, can you please help with the above? COME ON!!! I spent a lot of money on the SEGGER/JLink device! :)
  • kraiskil -

    Posted the thread Profiling CortexM0 with Ozone.

    Thread
    Is "Code Profiling" with Ozone possible when the target is a ARM CortexM0 (which lacks SWV/SWO, and if I understand correctly, the ITM module)? Ozone happily opens the "Code Profile" window for me, but no execution statistics seem to be collected.…
  • Newbie question: What is the suggested Vendor& Manufacturer's Part Number for the connector to design into my Target, to mate with the 19-pin Cortex-M Adaptor ribbon cable? BR, Kevin
  • godmode -

    Posted the thread [J-Trace] [Texas Instruments AM335x] Compatibility.

    Thread
    Is TI AM335x compatible with J-Trace? Iam struggling to connect this processor to J-Trace. Does anyone managed to connect it to J-Trace?
  • ThomasG -

    Replied to the thread Ozone 2.70a: Issues running under Ubuntu 18.04 in virtual machine.

    Post
    Thanks for your reply. Adding the two project files here. The one titled Ozone3.jdebug is used on the Win10 host, the other on the Ubuntu VM. The target in both cases is physically the same custom i.MX6S board with 1GB of RAM, and the same JLink.