J-Link/Flasher related

Subjects regarding J-Link, J-Trace, Flasher ARM, Flasher RX, Flasher PPC, Flasher Portable, RDI, GDB-Server, Flash Download, Flash Breakpoints, etc.  

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

Announcement Welcome / Terms of use

0 358,605

Announcement SEGGER Real Time Terminal

0 184,286

[ABANDONED] J-Commander "Could not preserve target memory" error

0 2,234

[ABANDONED] Fail to write option bytes by J-Link using the unlock sequence with J-Link Commander

0 1,664

[SOLVED] More Specific Error Reporting for JLink.exe

1 5,501

SEGGER - Nino

[SOLVED] VTarget = 0.0V but JTAG pin 1 = 3.3V

1 6,132

SEGGER - Nino

[SOLVED] Can't program RZA1H custom board

1 4,819

SEGGER - Nino

[SOLVED] Read manipulate and write fuse settings using J-link Commander Script Commands

1 4,660

SEGGER - Nino

[SOLVED] Select between SysBus and ProgBuf when accessing memory on RISC-V core?

1 6,621

SEGGER - Nino

[SOLVED] JLinkExe: Improper behavior of "step" and "stepover" commands on RISC-V

1 8,490

SEGGER - Nino

[SOLVED] J-Flash Choose Programming wrong file then when connect the program to MCU will show "Could not find core in Coresight setup" MK70FN1M0XXX15

1 5,629

SEGGER - Fabian

[SOLVED] Memory test of MCIMX6S5

1 3,366

SEGGER - Fabian

[ABANDONED] Cannot erase and program anymore MK70FN1M0XXX15

1 3,890

SEGGER - Fabian

[SOLVED] JLink Can`t connect to IoT Device Bosch XDK

1 4,607

SEGGER - Fabian

[SOLVED] J-link not communicating with target device

1 3,549

SEGGER - Alex

[SOLVED] Communication error while accessing MDM-AP

1 4,876

DenisCollis

Read eFuse status register with J-link Commander

1 3,803

SEGGER - Alex

[ABANDONED] GigaDevice GD32F307VC Connect after reconfiguring Debug / SWD Pins to GPIOs in Firmware

  • dwi
  • dwi
2 3,167

dwi

[SOLVED] Cannot connect to Adafruit M0 board with J-Link Commander ****** Error: InitTarget(): PCode returned with error code -1

3 7,677

SEGGER - Nino

[SOLVED] unable to program axf file using j-link commander

3 8,708

SEGGER - Fabian

[ABANDONED] J-Flash/Lite/J-Link Commander fails to program external QSPI flash

3 7,122

SEGGER - Fabian

[SOLVED] Writing more than 1024 Bytes into FLASH via J-Link results in unintended sector erase

3 7,883

SEGGER - Fabian

  • Statistics

    4,728 Threads - 18,000 Posts (3.01 Posts per Day)