Application log started
 - J-Flash V7.88c (J-Flash compiled May 16 2023 15:43:56)
 - JLinkARM.dll V7.88c (DLL compiled May 16 2023 15:43:32)
Optional command line parameters found
 - [1]: -openprj
 - [2]: example2.jflash
 - [3]: -open
 - [4]: jlink/target/thumbv7em-none-eabihf/release/examples/led.elf
 - [5]: -auto
 - [6]: -jflashlog
 - [7]: jflash.log
 - [8]: -jlinklog
 - [9]: jlink.log
 - [10]: -startapp
Reading flash device list [/opt/SEGGER/JLink/ETC/JFlash/Flash.csv] ...
 - List of flash devices read successfully (225 Devices)
Reading MCU device list ...
 - List of MCU devices read successfully (10343 Devices)
Opening project file [example2.jflash] ...
 - Project opened successfully
Opening data file [jlink/target/thumbv7em-none-eabihf/release/examples/led.elf] ...
 - Parsing ELF file...
 - Reading data range 0x60000000 - 0x60000008...
 - Reading data range 0x8000000 - 0x8000298...
 - Reading data range 0x8000298 - 0x8001C04...
 - Reading data range 0x8001C04 - 0x8001EE4...
 - Data file opened successfully (7916 bytes, 2 ranges, CRC of data = 0xC19622ED, CRC of file = 0xB493B4C9)
Auto programming target (7916 bytes, 2 ranges) ...
 - Connecting ...
  - Connected successfully
 - Checking if selected data fits into selected flash sectors.
 - Start of preparing flash programming
 - End of preparing flash programming
 - Start of determining dirty areas in flash cache
 - End of determining dirty areas
 - CPU is running at 120000 kHz.
 - Start of erasing sectors
 - Blank checking 0x08000000 - 0x0801FFFF
 - Erasing range 0x08000000 - 0x0801FFFF (  1 Sector, 128 KB)
 - End of erasing sectors
 - Start of flash programming
 - Programming range 0x08000000 - 0x0801FFFF (  1 Sector, 128 KB)
 - End of flash programming
 - Flash programming performed for 1 range (131072 bytes)
 - 0x8000000 - 0x801FFFF (  1 Sector, 128 KB)
 - Start of verifying flash
 - End of verifying flash
 - Start of restoring
 - End of restoring
 - WARNING: Flash bank 2 disabled, skipped.
 - Start of determining flash info (Bank 3 @ 0x60000000)
 - ERROR: Could not find CFI compliant flash device
 - ERROR: Error while determining flash info (Bank 3 @ 0x60000000)
 - ERROR: Failed to auto program target
J-Flash V7.88c Error: Could not find CFI compliant flash device
Error while determining flash info (Bank 3 @ 0x60000000)
Failed to auto program target
Disconnecting ...
 - HandleAfterFlashProg() start
 - HandleAfterFlashProg() end - Took 318us
 - OnDisconnectTarget() start
 - OnDisconnectTarget() end - Took 1.00ms
 - Disconnected
Close project
 - Project closed