Application log started
 - J-Flash V7.20 (J-Flash compiled Apr 28 2021 17:34:40)
 - JLinkARM.dll V7.20 (DLL compiled Apr 28 2021 17:34:08)
Reading flash device list [C:\Program Files (x86)\SEGGER\JLink_V720\ETC/JFlash/Flash.csv] ...
 - List of flash devices read successfully (451 Devices)
Reading MCU device list ...
 - List of MCU devices read successfully (8389 Devices)
Creating new project ...
 - New project created successfully
Connecting ...
 - Connecting via USB to probe/ programmer device 0
 - Probe/ Programmer firmware: J-Link V9 compiled Feb  2 2021 16:34:10
 - Device "MIMXRT1021XXX5A" selected.
 - Target interface speed: 4000 kHz (Fixed)
 - VTarget = 3.229V
 - Found SW-DP with ID 0x0BD11477
 - DPIDR: 0x0BD11477
 - Scanning AP map to find all available APs
 - AP[1]: Stopped AP scan as end of AP map has been reached
 - AP[0]: AHB-AP (IDR: 0x04770041)
 - Iterating through AP map to find AHB-AP to use
 - AP[0]: Core found
 - AP[0]: AHB-AP ROM base: 0xE00FD000
 - CPUID register: 0x411FC271. Implementer code: 0x41 (ARM)
 - Found Cortex-M7 r1p1, Little endian.
 - FPUnit: 8 code (BP) slots and 0 literal slots
 - CoreSight components:
 - ROMTbl[0] @ E00FD000
 - ROMTbl[0][0]: E00FE000, CID: B105100D, PID: 000BB4C8 ROM Table
 - ROMTbl[1] @ E00FE000
 - ROMTbl[1][0]: E00FF000, CID: B105100D, PID: 000BB4C7 ROM Table
 - ROMTbl[2] @ E00FF000
 - ROMTbl[2][0]: E000E000, CID: B105E00D, PID: 000BB00C SCS-M7
 - ROMTbl[2][1]: E0001000, CID: B105E00D, PID: 000BB002 DWT
 - ROMTbl[2][2]: E0002000, CID: B105E00D, PID: 000BB00E FPB-M7
 - ROMTbl[2][3]: E0000000, CID: B105E00D, PID: 000BB001 ITM
 - ROMTbl[1][1]: E0041000, CID: B105900D, PID: 001BB975 ETM-M7
 - ROMTbl[1][2]: E0042000, CID: B105900D, PID: 004BB906 CTI
 - ROMTbl[0][1]: E0040000, CID: B105900D, PID: 000BB9A9 TPIU-M7
 - ROMTbl[0][2]: E0043000, CID: B105F00D, PID: 001BB101 TSG
 - Cache: Separate I- and D-cache.

 - I-Cache L1: 16 KB, 256 Sets, 32 Bytes/Line, 2-Way
 - D-Cache L1: 16 KB, 128 Sets, 32 Bytes/Line, 4-Way
 - Executing init sequence ...
  - Initialized successfully
 - Target interface speed: 4000 kHz (Fixed)
 - Found 1 JTAG device. Core ID: 0x0BD11477 (None)
 - Connected successfully
Opening data file [<PATH>\helloWorldRt1020.mot] ...
 - Data file opened successfully (12644 bytes, 3 ranges, CRC of data = 0x8E849A69, CRC of file = 0xDCFF7CD2)
Programming and verifying target (12644 bytes, 3 ranges) ...
 - Checking if selected data fits into selected flash sectors.
 - Start of determining flash info (Bank 0 @ 0x60000000)
 - ERROR: Failed to prepare RAMCode using RAM
 - ERROR: Error while determining flash info (Bank 0 @ 0x60000000)
 - ERROR: Failed to program and verify target
Disconnecting ...
 - Disconnected