Connecting 'J-Link' using 'USB'
  Connecting to target using SWD
    Loaded /opt/SStudio452/bin/libjlinkarm.so
    Firmware Version: J-Link V10 compiled Jan  7 2020 16:51:47
    DLL Version: 6.72d
    Hardware Version: V10.10
    Target Voltage: 3.361
  Device "NRF52832_XXAA" selected.
  InitTarget() start
  InitTarget() end
  Found SW-DP with ID 0x2BA01477
  DPIDR: 0x2BA01477
  Scanning AP map to find all available APs
  AP[2]: Stopped AP scan as end of AP map has been reached
  AP[0]: AHB-AP (IDR: 0x24770011)
  AP[1]: JTAG-AP (IDR: 0x02880000)
  Iterating through AP map to find AHB-AP to use
  AP[0]: Core found
  AP[0]: AHB-AP ROM base: 0xE00FF000
  CPUID register: 0x410FC241. Implementer code: 0x41 (ARM)
  Found Cortex-M4 r0p1, Little endian.
  FPUnit: 6 code (BP) slots and 2 literal slots
  CoreSight components:
  ROMTbl[0] @ E00FF000
  ROMTbl[0][0]: E000E000, CID: B105E00D, PID: 000BB00C SCS-M7
  ROMTbl[0][1]: E0001000, CID: B105E00D, PID: 003BB002 DWT
  ROMTbl[0][2]: E0002000, CID: B105E00D, PID: 002BB003 FPB
  ROMTbl[0][3]: E0000000, CID: B105E00D, PID: 003BB001 ITM
  ROMTbl[0][4]: E0040000, CID: B105900D, PID: 000BB9A1 TPIU
  ROMTbl[0][5]: E0041000, CID: B105900D, PID: 000BB925 ETM