Application log started
 - J-Flash V6.81b (J-Flash compiled Jun  9 2020 17:41:03)
 - JLinkARM.dll V6.81b (DLL compiled Jun  9 2020 17:40:37)
Optional command line parameters found
 - [1]: -openprjC:\Users\DSG-HW2\Desktop\FLASHER\Files\PROGRAM_V20_01_Project.jflash
 - [2]: -setcpuidcodeFF1111111111111111111111111111FF
 - [3]: -startapp
Reading flash device list [C:\Program Files (x86)\SEGGER\JLink\ETC/JFlash/Flash.csv] ...
 - List of flash devices read successfully (451 Devices)
Reading MCU device list ...
 - List of MCU devices read successfully (7745 Devices)
Opening project file [C:\Users\DSG-HW2\Desktop\FLASHER\Files\PROGRAM_V20_01_Project.jflash] ...
 - Project opened successfully
Opening data file [C:/Users/DSG-HW2/Desktop/DSG_FLASHER_RENESAS/SY-FLASH/Files/PICTOGRAMA_V20_01.srec] ...
 - Data file opened successfully (270380 bytes, 3 ranges, CRC of data = 0x14C3545D, CRC of file = 0xA7890740)
Starting application ...
 - Connecting via USB to probe/ programmer device 0
 - Probe/ Programmer firmware: J-Link / Flasher Portable Plus V1 compiled Jun  5 2020 14:48:41
 - Device "R7FS3A678" selected.
 - Found SW-DP with ID 0x5BA02477
 - Found SW-DP with ID 0x5BA02477
 - DPIDR: 0x5BA02477
 - Scanning AP map to find all available APs
 - AP[2]: Stopped AP scan as end of AP map has been reached
 - AP[0]: AHB-AP (IDR: 0x24770011)
 - AP[1]: APB-AP (IDR: 0x44770002)
 - Iterating through AP map to find AHB-AP to use
 - AP[0]: Core found
 - AP[0]: AHB-AP ROM base: 0xE00FF000
 - CPUID register: 0x410FC241. Implementer code: 0x41 (ARM)
 - Found Cortex-M4 r0p1, Little endian.
 - FPUnit: 6 code (BP) slots and 2 literal slots
 - CoreSight components:
 - ROMTbl[0] @ E00FF000
 - ROMTbl[0][0]: E000E000, CID: B105E00D, PID: 000BB00C SCS-M7
 - ROMTbl[0][1]: E0001000, CID: B105E00D, PID: 003BB002 DWT
 - ROMTbl[0][2]: E0002000, CID: B105E00D, PID: 002BB003 FPB
 - ROMTbl[0][3]: E0000000, CID: B105E00D, PID: 003BB001 ITM
 - ROMTbl[0][4]: E0040000, CID: B105900D, PID: 000BB9A1 TPIU
 - ROMTbl[0][5]: E0041000, CID: B105900D, PID: 000BB925 ETM
 - ROMTbl[0][6]: E0042000, CID: B105900D, PID: 002BB908 CSTF
 - ROMTbl[0][7]: E0043000, CID: B105900D, PID: 001BB961 TMC
 - ROMTbl[0][8]: E0044000, CID: B105F00D, PID: 001BB101 TSG
 - Reset: Halt core after reset via DEMCR.VC_CORERESET.
 - Reset: Reset device via AIRCR.SYSRESETREQ.
 - Target application started
Close project
 - Project closed