SEGGER J-Link GDB Server V6.54a LogFile Logging started @ 2019-11-15 13:54 03-00000000-00-00000000-001F: SEGGER J-Link GDB Server V6.54a 03-00000000-00-00000000-000E: GUI Version 03-00000000-00-00000000-0039: JLinkARM.dll V6.54a (DLL compiled Oct 31 2019 17:38:34) 03-00000000-00-00000000-01AC: -----GDB Server start settings----- GDBInit file: none GDB Server Listening port: 2334 SWO raw output listening port: 2335 Terminal I/O port: 2336 Accept remote connection: yes Generate logfile: on Verify download: off Init regs on start: off Silent mode: off Single run mode: off Target connection timeout: 5000 ms 03-00000000-00-00000000-016F: ------J-Link related settings------ J-Link Host interface: IP J-Link script: MCIMX6-core-1.JLinkScript J-Link settings file: none ------Target related settings------ Target device: MCIMX6Q6 Target interface: JTAG Target interface speed: auto Target endian: little 03-00000000-00-00000000-0001: 03-00000000-00-00000000-0018: Connecting to J-Link... 02-00000000-00-00001011-0018: TBCD06700 001:031.244 02-00000000-00-00001011-000F: ***** Error: 02-00000000-00-00001011-0057: TBCD06700 001:031.353 Can not connect to J-Link via TCP/IP (192.168.2.72, port 19020) 02-00000000-00-00001021-0018: TBCD06700 001:041.596 02-00000000-00-00001021-000F: ***** Error: 02-00000000-00-00001021-0031: TBCD06700 001:041.723 Cannot connect to J-Link. 02-00000000-00-00001021-006B: TBCD06700 001:041.868 - 1021.141ms returns "Can not connect to J-Link via TCP/IP (192.168.2.72, port 19020) 02-00000000-00-00001021-001A: Cannot connect to J-Link." 03-00000000-00-00001021-0032: Connecting to J-Link failed. Connected correctly? 03-00000000-00-00001021-001C: GDBServer will be closed... 02-00000000-00-00003032-0024: TBCD06700 003:052.251 JLINK_IsOpen() 02-00000000-00-00003032-002C: TBCD06700 003:052.326 - 0.078ms returns 0x00 03-00000000-00-00003032-0011: Shutting down...