Application log started
 - J-Flash V6.54c (J-Flash compiled Nov  7 2019 17:01:41)
 - JLinkARM.dll V6.54c (DLL compiled Nov  7 2019 17:01:02)
Opening project file [C:\Users\sauci\Desktop\boot_ecc.jflash] ...
 - Project opened successfully
Opening data file [C:\Users\sauci\Downloads\boot_ecc.bin] ...
 - Data file opened successfully (2048 bytes, 1 range, CRC of data = 0x9061CB4E, CRC of file = 0x9061CB4E)
Programming target (2048 bytes, 1 range) ...
 - Connecting ...
    - Connecting via USB to J-Link device 0
    - J-Link firmware: J-Trace PRO V2 Cortex compiled Oct 31 2019 15:36:35
    - Device "TMS570LC4357" selected.
    - Target interface speed: 4000 kHz (Fixed)
    - VTarget = 3.298V
    - Executing InitTarget()
    - TotalIRLen = 6, IRPrint = 0x01
    - J-Link script: ICEPick found, enabling Cortex-M3 core.
    - TotalIRLen = 6, IRPrint = 0x01
    - JTAG chain detection found 1 devices:
    -  #0 Id: 0x1B95A02F, IRLen: 06, TI ICEPick
    - TotalIRLen = 10, IRPrint = 0x0011
    - JTAG chain detection found 2 devices:
    -  #0 Id: 0x4BA00477, IRLen: 04, CoreSight JTAG-DP
    -  #1 Id: 0x1B95A02F, IRLen: 06, TI ICEPick
    - Scanning AP map to find all available APs
    - AP[3]: Stopped AP scan as end of AP map has been reached
    - AP[0]: AHB-AP (IDR: 0x44770001)
    - AP[1]: APB-AP (IDR: 0x24770002)
    - AP[2]: JTAG-AP (IDR: 0x14760010)
    - Iterating through AP map to find APB-AP to use
    - AP[0]: Skipped. Not an APB-AP
    - AP[1]: APB-AP found
    - ROMTbl[0][0]: CompAddr: 80001000 CID: B105900D, PID:04-003BBC15 Cortex-R5
    - Found Cortex-R5 r1p2
    - 8 code breakpoints, 8 data breakpoints
    - Debug architecture ARMv7.0
    - Data endian: big
    - Main ID register: 0x411FC152
    - I-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
    - D-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
    - TCM Type register: 0x00010001
    - MPU Type register: 0x00001000
    - System control register:
    -   Instruction endian: big
    -   Level-1 instruction cache disabled
    -   Level-1 data cache disabled
    -   MPU disabled
    -   Branch prediction enabled
    - Executing SetupTarget()
    - Memory access: CPU temp. halted: https://wiki.segger.com/Memory_accesses#Stop_mode
    - TMS570LS: HandleSetup(): Initializing ECC protected RAM
    - Executing init sequence ...
       - Executing Reset (0, 0 ms)
          - Executing ResetTarget()
       - Initialized successfully
    - Target interface speed: 4000 kHz (Fixed)
    - CPU clock frequency: 4903 kHz (Auto detected)
    - J-Link found 2 JTAG devices. Core ID: 0x4BA00477 (None)
    - Connected successfully
 - Checking if selected data fits into selected flash sectors.
    - ERROR: Selected Data (0xF0400000 - 0xF04007FF) does not fit into selected flash sectors.
    - ERROR: Could not execute task.
 - ERROR: Could not program target
Disconnecting ...
 - Disconnected