Debug.Start();
Device "XCZU7EV_R5_0" selected.
ConfigTargetSettings() start
ConfigTargetSettings() end
InitTarget() start
InitTarget() end
TotalIRLen = 16, IRPrint = 0x000511
JTAG chain detection found 2 devices:
 #0 Id: 0x00000001, IRLen: 05, Unknown device
 #1 Id: 0x14710093, IRLen: 11, Unknown device
ConfigTargetSettings() start
ConfigTargetSettings() end
InitTarget() start
InitTarget() end
TotalIRLen = 16, IRPrint = 0x000411
JTAG chain detection found 2 devices:
 #0 Id: 0x5BA00477, IRLen: 04, CoreSight JTAG-DP
 #1 Id: 0x14710093, IRLen: 11, Unknown device
AP map detection skipped. Manually configured AP map found.
AP[0]: CUSTOM-AP (IDR: Not set)
AP[1]: APB-AP (IDR: Not set)
AP[2]: CUSTOM-AP (IDR: Not set)
Using preconfigured AP[1] as APB-AP
AP[1]: APB-AP found
Found Cortex-R5 r1p3
8 code breakpoints, 8 data breakpoints
Debug architecture ARMv7.0
Data endian: little
Main ID register: 0x411FC153
I-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
D-Cache L1: 32 KB, 256 Sets, 32 Bytes/Line, 4-Way
TCM Type register: 0x00010001
MPU Type register: 0x00001000
System control register:
  Instruction endian: little
  Level-1 instruction cache disabled
  Level-1 data cache disabled
  MPU disabled
  Branch prediction enabled
CPU-TAP not found in JTAG chain
Using stop mode for background memory accesses: https://wiki.segger.com/Memory_accesses.
Connected to target device.
ResetTarget() start
ResetTarget() end
Elf.GetEntryPointPC(); // returns 0x3C
Target.SetReg ("PC", 0x3C);
Connection to target device lost.
Disconnected from target device.