Tue Feb 05, 2019 14:54:12: IAR Embedded Workbench 8.30.1 (C:\Program Files (x86)\IAR Systems\Embedded Workbench 8.1\arm\bin\armproc.dll) 
Tue Feb 05, 2019 14:54:12: Loaded macro file: C:\Program Files (x86)\IAR Systems\Embedded Workbench 8.1\arm\config\debugger\Toshiba\cortex m3 based (edited).dmac 
Tue Feb 05, 2019 14:54:12: None of the application was placed in flash memory. 
Tue Feb 05, 2019 14:54:12: Downloaded C:\Users\niaar\Desktop\Project\Template\IAR\Debug\Exe\project.out to flash memory. 
Tue Feb 05, 2019 14:54:13: JLINK command: ProjectFile = C:\Users\niaar\Desktop\Project\Template\IAR\settings\project_Debug.jlink, return = 0 
Tue Feb 05, 2019 14:54:13: Device "cortex m3 based (edited)" selected. 
Tue Feb 05, 2019 14:54:13: DLL version: V6.16h, compiled Jul 14 2017 17:23:19 
Tue Feb 05, 2019 14:54:13: Firmware: J-Link ARM Lite V8 compiled Mar 14 2018 16:03:26 
Tue Feb 05, 2019 14:54:13: Selecting SWD as current target interface. 
Tue Feb 05, 2019 14:54:13: JTAG speed is initially set to: 1000 kHz 
Tue Feb 05, 2019 14:54:13: Found SW-DP with ID 0x2BA01477 
Tue Feb 05, 2019 14:54:13: Scanning APs, stopping at first AHB-AP found. 
Tue Feb 05, 2019 14:54:13: AP[0] IDR: 0x24770011 (AHB-AP) 
Tue Feb 05, 2019 14:54:13: AHB-AP ROM: 0xE00FF000 (Base addr. of first ROM table) 
Tue Feb 05, 2019 14:54:13: CPUID reg: 0x412FC230. Implementer code: 0x41 (ARM) 
Tue Feb 05, 2019 14:54:13: Found Cortex-M3 r2p0, Little endian. 
Tue Feb 05, 2019 14:54:13: FPUnit: 6 code (BP) slots and 2 literal slots 
Tue Feb 05, 2019 14:54:13: CoreSight components: 
Tue Feb 05, 2019 14:54:13: ROMTbl[0] @ E00FF000 
Tue Feb 05, 2019 14:54:13: ROMTbl[0][0]: E000E000, CID: B105E00D, PID: 002BB000 SCS 
Tue Feb 05, 2019 14:54:13: ROMTbl[0][1]: E0001000, CID: B105E00D, PID: 002BB002 DWT 
Tue Feb 05, 2019 14:54:13: ROMTbl[0][2]: E0002000, CID: B105E00D, PID: 002BB003 FPB 
Tue Feb 05, 2019 14:54:13: ROMTbl[0][3]: E0000000, CID: B105E00D, PID: 002BB001 ITM 
Tue Feb 05, 2019 14:54:13: ROMTbl[0][4]: E0040000, CID: B105900D, PID: 002BB923 TPIU-Lite 
Tue Feb 05, 2019 14:54:13: ROMTbl[0][5]: E0041000, CID: B105900D, PID: 002BB924 ETM-M3 
Tue Feb 05, 2019 14:54:13: Reset: Halt core after reset via DEMCR.VC_CORERESET. 
Tue Feb 05, 2019 14:54:13: Reset: Reset device via AIRCR.VECTRESET. 
Tue Feb 05, 2019 14:54:13: Reset: Halt core after reset via DEMCR.VC_CORERESET. 
Tue Feb 05, 2019 14:54:13: Reset: Reset device via AIRCR.VECTRESET. 
Tue Feb 05, 2019 14:54:14: Reset: VECTRESET has confused core. 
Tue Feb 05, 2019 14:54:14: Reset: Failed. Toggling reset pin and trying reset strategy again. 
Tue Feb 05, 2019 14:54:14: Reset: Halt core after reset via DEMCR.VC_CORERESET. 
Tue Feb 05, 2019 14:54:14: Reset: Reset device via AIRCR.VECTRESET. 
Tue Feb 05, 2019 14:54:14: Reset: CPU may have not been reset (DHCSR.S_RESET_ST never gets set). 
Tue Feb 05, 2019 14:54:16: IAR Embedded Workbench 8.30.1 (C:\Program Files (x86)\IAR Systems\Embedded Workbench 8.1\arm\bin\armproc.dll)