SEGGER J-Link GDB Server V6.34e Command Line Version

JLinkARM.dll V6.34e (DLL compiled Aug 30 2018 17:36:45)

Command line: -port 2331 -s -CPU Cortex-M -device STM32L431CC -endian little -speed 1000 -if swd -vd
-----GDB Server start settings-----
GDBInit file:                  none
GDB Server Listening port:     2331
SWO raw output listening port: 2332
Terminal I/O port:             2333
Accept remote connection:      localhost only
Generate logfile:              off
Verify download:               on
Init regs on start:            off
Silent mode:                   off
Single run mode:               on
Target connection timeout:     0 ms
------J-Link related settings------
J-Link Host interface:         USB
J-Link script:                 none
J-Link settings file:          none
------Target related settings------
Target device:                 STM32L431CC
Target interface:              SWD
Target interface speed:        1000kHz
Target endian:                 little

Connecting to J-Link...
J-Link is connected.
Firmware: J-Link V10 compiled Oct 26 2018 12:04:17
Hardware: V10.10
S/N: 260107988
OEM: SEGGER-EDU
Feature(s): FlashBP, GDB
Checking target voltage...
Target voltage: 2.11 V
Listening on TCP/IP port 2331
Connecting to target...Connected to target
Waiting for GDB connection...Connected to 127.0.0.1
Reading all registers
Read 4 bytes @ address 0x1FFF2E36 (Data = 0x28016AE0)
Read 2 bytes @ address 0x1FFF2E36 (Data = 0x6AE0)
Connected to 127.0.0.1
Reading all registers
Read 4 bytes @ address 0x1FFF2E36 (Data = 0x28016AE0)
Read 2 bytes @ address 0x1FFF2E36 (Data = 0x6AE0)
Received monitor command: WriteDP 0x2 0x000000F0
O.K.
Received monitor command: ReadAP 0x2
O.K.:0xE00FF003
Reading 32 bytes @ address 0xE00FFFD0
Received monitor command: speed 30
Target interface speed set to 30 kHz
Received monitor command: endian little
Target endianess set to "little endian"
Received monitor command: reset
Resetting target
Received monitor command: speed auto
Select auto target interface speed (2000 kHz)
Received monitor command: flash download = 1
Flash download enabled
Downloading 396 bytes @ address 0x08000000 - Verified OK
Downloading 980 bytes @ address 0x0800018C - Verified OK
Downloading 992 bytes @ address 0x08000560 - Verified OK
Downloading 976 bytes @ address 0x08000940 - Verified OK
Downloading 976 bytes @ address 0x08000D10 - Verified OK
Downloading 960 bytes @ address 0x080010E0 - Verified OK
Downloading 976 bytes @ address 0x080014A0 - Verified OK
Downloading 976 bytes @ address 0x08001870 - Verified OK
Downloading 960 bytes @ address 0x08001C40 - Verified OK
Downloading 976 bytes @ address 0x08002000 - Verified OK
Downloading 944 bytes @ address 0x080023D0 - Verified OK
Downloading 960 bytes @ address 0x08002780 - Verified OK
Downloading 960 bytes @ address 0x08002B40 - Verified OK
Downloading 944 bytes @ address 0x08002F00 - Verified OK
Downloading 960 bytes @ address 0x080032B0 - Verified OK
Downloading 976 bytes @ address 0x08003670 - Verified OK
Downloading 372 bytes @ address 0x08003A40 - Verified OK
Downloading 92 bytes @ address 0x08003BB4 - Verified OK
Downloading 8 bytes @ address 0x08003C10 - Verified OK
Downloading 4 bytes @ address 0x08003C18 - Verified OK
Downloading 4 bytes @ address 0x08003C1C - Verified OK
Downloading 4 bytes @ address 0x08003C20 - Verified OK
Writing register (PC = 0x 80004dc)
Read 4 bytes @ address 0x080004DC (Data = 0xD034F8DF)
Received monitor command: reset
Resetting target
Read 2 bytes @ address 0x080005B0 (Data = 0x4CA1)
Read 4 bytes @ address 0x08000838 (Data = 0x40021000)
Read 2 bytes @ address 0x080005B0 (Data = 0x4CA1)
Read 4 bytes @ address 0x08000838 (Data = 0x40021000)
Read 2 bytes @ address 0x080005B0 (Data = 0x4CA1)
Setting breakpoint @ address 0x080005B0, Size = 2, BPHandle = 0x0001
Starting target CPU...
Debugger requested to halt target...
...Target halted (PC = 0x1FFF2CF2)
Reading all registers
Read 4 bytes @ address 0x1FFF2CF2 (Data = 0x07096909)
Read 2 bytes @ address 0x1FFF2CF2 (Data = 0x6909)
Removing breakpoint @ address 0x080005B0, Size = 2
Read 4 bytes @ address 0xE000ED04 (Data = 0x00000000)
Read 4 bytes @ address 0x1FFF2CD6 (Data = 0x2000E001)
Read 2 bytes @ address 0x1FFF2CD6 (Data = 0xE001)
Read 4 bytes @ address 0x1FFF2CD6 (Data = 0x2000E001)
Read 2 bytes @ address 0x1FFF2CD6 (Data = 0xE001)
Read 4 bytes @ address 0xE000ED2C (Data = 0x00000000)
Read 4 bytes @ address 0xE000ED28 (Data = 0x00000000)
Read 4 bytes @ address 0xE000ED38 (Data = 0xE000EDF8)
Read 4 bytes @ address 0xE000ED34 (Data = 0xE000EDF8)