SEGGER J-Link Commander V6.32c (Compiled May 11 2018 16:30:45)
DLL version V6.32c, compiled May 11 2018 16:30:26


J-Link Command File read successfully.
Processing script file...

J-Link connection not established yet but required for command.
Connecting to J-Link via USB...O.K.
Firmware: J-Link Ultra Rev.1 compiled Dec  3 2013 14:27:53
Hardware version: V1.00
S/N: 501200384
License(s): RDI, FlashBP, FlashDL, JFlash, GDB
VTref=4.562V

Target connection not established yet but required for command.
Device "MB9DF125" selected.


Connecting to target via JTAG
--- FSEU script --- InitTarget() from JLinkScript is executed
--- FSEU script --- MCU reset
--- FSEU script --- ERROR: Could not power up debug port (time-out reached)!
--- FSEU script --- OK: ARM JTAG-DP detected (JTAG IDCODE: 0x4ba00477)
TotalIRLen = 4, IRPrint = 0x01
JTAG chain detection found 1 devices:
 #0 Id: 0x4BA00477, IRLen: 04, CoreSight JTAG-DP
Scanning AP map to find all available APs
AP[3]: Stopped AP scan as end of AP map has been reached
AP[0]: AHB-AP (IDR: 0x44770001)
AP[1]: APB-AP (IDR: 0x24770002)
AP[2]: JTAG-AP (IDR: 0x14760010)
Iterating through AP map to find AHB-AP to use
AP[0]: Skipped. Not an APB-AP
AP[1]: APB-AP found
ROMTbl[0][0]: CompAddr: 80001000 CID: B105900D, PID:04-107BBC14 Cortex-R4
Found Cortex-R4 r1p3
8 code breakpoints, 8 data breakpoints
Debug architecture ARMv7.0
Data endian: little
Main ID register: 0x411FC143
I-Cache L1: 8 KB, 64 Sets, 32 Bytes/Line, 4-Way
D-Cache L1: 8 KB, 64 Sets, 32 Bytes/Line, 4-Way
TCM Type register: 0x00010001
MPU Type register: 0x00000C00
System control register:
  Instruction endian: little
  Level-1 instruction cache disabled
  Level-1 data cache disabled
  MPU disabled
  Branch prediction enabled
--- FSEU script --- ResetTarget() from JLinkScript is executed
--- FSEU script --- MCU reset
--- FSEU script --- OK: ARM JTAG-DP detected (JTAG IDCODE: 0x4ba00477)
Memory zones:
  Default  Default access mode
  AHB-AP (AP0)  DMA like acc. in AP0 addr. space
  APB-AP (AP1)  DMA like acc. in AP1 addr. space
Cortex-R4 identified.
Memory access: CPU temp. halted: https://wiki.segger.com/Memory_accesses#Legacy_stop_mode

**************************
WARNING: CPU could not be halted
**************************


****** Error: Could not start CPU core. (ErrorCode: -1)
Could not read memory.


**************************
WARNING: CPU could not be halted
**************************


****** Error: Could not start CPU core. (ErrorCode: -1)
Could not read memory.


**************************
WARNING: CPU could not be halted
**************************


****** Error: Could not start CPU core. (ErrorCode: -1)
Could not read memory.


Script processing completed.

Drcken Sie eine beliebige Taste . . .