SEGGER J-Link GDB Server V6.22g LogFile
Logging started @ 2018-02-02 15:44
03-00000000-00-00000000-00BF: Command line: -if JTAG -device MCIMX7D7_M4 -speed 300 -jlinkscriptfile C:\Eclipse_MCU_And_Toolchains\JLink\JLink_V622g\Devices\NXP\iMX7D\NXP_iMX7D_Connect_CortexM4.JLinkScript -log SABRE_M4_con.txt
03-00000000-00-00000010-0023: -----GDB Server start settings-----
03-00000000-00-00000010-0023: GDBInit file:                  none
03-00000000-00-00000010-0023: GDB Server Listening port:     2331
03-00000000-00-00000010-0023: SWO raw output listening port: 2332
03-00000000-00-00000010-0023: Terminal I/O port:             2333
03-00000000-00-00000010-002D: Accept remote connection:      localhost only
03-00000000-00-00000010-0021: Generate logfile:              on
03-00000000-00-00000010-0022: Verify download:               off
03-00000000-00-00000010-0022: Init regs on start:            off
03-00000000-00-00000010-0022: Silent mode:                   off
03-00000000-00-00000010-0022: Single run mode:               off
03-00000000-00-00000010-0023: Target connection timeout:     0 ms
03-00000000-00-00000019-0023: ------J-Link related settings------
03-00000000-00-00000019-0022: J-Link Host interface:         USB
03-00000000-00-00000019-0087: J-Link script:                 C:\Eclipse_MCU_And_Toolchains\JLink\JLink_V622g\Devices\NXP\iMX7D\NXP_iMX7D_Connect_CortexM4.JLinkScript
03-00000000-00-00000019-0023: J-Link settings file:          none
03-00000000-00-00000019-0023: ------Target related settings------
03-00000000-00-00000019-002A: Target device:                 MCIMX7D7_M4
03-00000000-00-00000019-0023: Target interface:              JTAG
03-00000000-00-00000019-0025: Target interface speed:        300kHz
03-00000000-00-00000019-0025: Target endian:                 little
03-00000000-00-00000020-0017: Connecting to J-Link...
02-00000000-00-00000026-0032: Firmware: J-Link V10 compiled Jan 11 2018 10:41:05
02-00000000-00-00000026-0010: Hardware: V10.10
02-00000000-00-00000026-000D: S/N: 50117772
02-00000000-00-00000029-000F: Feature(s): GDB
02-00000000-00-00000039-0032: TELNET listener socket opened on port 19021WEBSRV 
02-00000000-00-00000039-0029: Starting webserver (0019ms, 0019ms total)
02-00000000-00-00000039-0051: T26CC 000:026 WEBSRV Webserver running on local port 19080 (0019ms, 0019ms total)
02-00000000-00-00000039-0033: T26CC 000:026   returns O.K. (0019ms, 0019ms total)
03-00000000-00-00000039-0014: J-Link is connected.
02-00000000-00-00000182-00BB: T26CC 000:045 JLINK_ExecCommand("device = MCIMX7D7_M4", ...). C:\Eclipse_MCU_And_Toolchains\JLink\JLink_V622g\JLinkDevices.xml evaluated successfully.  returns 0x00 (0143ms, 0162ms total)
02-00000000-00-00000185-00C4: T26CC 000:188 JLINK_ExecCommand("ScriptFile = C:\Eclipse_MCU_And_Toolchains\JLink\JLink_V622g\Devices\NXP\iMX7D\NXP_iMX7D_Connect_CortexM4.JLinkScript", ...).   returns 0x00 (0003ms, 0165ms total)
02-00000000-00-00000185-0041: T26CC 000:191 JLINK_GetFirmwareString(...) (0000ms, 0165ms total)
03-00000000-00-00000187-0032: Firmware: J-Link V10 compiled Jan 11 2018 10:41:05
02-00000000-00-00000187-0050: T26CC 000:193 JLINK_GetHardwareVersion()  returns 0x18A88 (0000ms, 0165ms total)
03-00000000-00-00000188-0010: Hardware: V10.10
03-00000000-00-00000188-000D: S/N: 50117772
03-00000000-00-00000188-000F: Feature(s): GDB
02-00000000-00-00000189-0049: T26CC 000:194 JLINK_GetHWStatus(...)  returns 0x00 (0001ms, 0166ms total)
02-00000000-00-00000189-003C: T26CC 000:195 JLINK_EnableSoftBPs(ON) (0000ms, 0166ms total)
03-00000000-00-00000189-001A: Checking target voltage...
03-00000000-00-00000190-0016: Target voltage: 3.32 V
03-00000000-00-00000190-001D: Listening on TCP/IP port 2331
03-00000000-00-00000190-0017: Connecting to target...
02-00000000-00-00000191-0035: T26CC 000:197 JLINK_ClrError() (0000ms, 0166ms total)
02-00000000-00-00000191-0049: T26CC 000:197 JLINK_GetHWStatus(...)  returns 0x00 (0000ms, 0166ms total)
02-00000000-00-00000192-0056: T26CC 000:197 JLINK_TIF_Select(JLINKARM_TIF_JTAG)  returns 0x00 (0001ms, 0167ms total)
02-00000000-00-00000192-0038: T26CC 000:198 JLINK_SetSpeed(300) (0000ms, 0167ms total)
02-00000000-00-00000192-0044: T26CC 000:198 JLINK_GetSpeed()  returns 0x12C (0000ms, 0167ms total)
02-00000000-00-00000192-0077: T26CC 000:198 JLINK_SetResetType(JLINKARM_RESET_TYPE_NORMAL)  returns JLINKARM_RESET_TYPE_NORMAL (0000ms, 0167ms total)
02-00000000-00-00000192-003B: T26CC 000:198 JLINK_SetResetDelay(0) (0000ms, 0167ms total)
02-00000000-00-00000192-0055: T26CC 000:198 JLINK_SetEndian(ARM_ENDIAN_LITTLE)  returns 0x00 (0000ms, 0167ms total)
02-00000000-00-00000204-01F8: T26CC 000:198 JLINK_Connect() J-Link Script File: Executing InitTarget() *************************************************J-Link script: iMX7D Cortex-M4 core J-Link script************************************************* >0x2F8 JTAG>TotalIRLen = 4, IRPrint = 0x01 >0x30 JTAG> >0x30 JTAG>AP map detection skipped. Manually configured AP map found.AP[0]: AHB-AP (IDR: Not set)AP[1]: APB-AP (IDR: Not set)AP[2]: CUSTOM-AP (IDR: Not set)AP[3]: CUSTOM-AP (IDR: Not set)AP[4]: AHB-AP (IDR: Not set) >0xB0 JTAG>
02-00000000-00-00000223-01F8:  >0x48 JTAG> >0x48 JTAG> >0x78 JTAG> >0x40 JTAG> >0x30 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG>
02-00000000-00-00000242-01F8:  >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG>
02-00000000-00-00000272-01F2:  >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG> >0x40 JTAG>AP[4]: Skipped. Could not read CPUID registerAP map detection skipped. Manually configured AP map found.AP[0]: AHB-AP (IDR: Not set)AP[1]: APB-AP (IDR: Not set)AP[2]: CUSTOM-AP (IDR: Not set)AP[3]: CUSTOM-AP (IDR: Not set)
02-00000000-00-00000273-0028: AP[4]: AHB-AP (IDR: Not set) >0xB0 JTAG>
02-00000000-00-00000273-007E:   ***** Error: Bad JTAG communication: Write to IR: Expected 0x1, got 0xF (TAP Command : 10) @ Off 0x5. (0081ms, 0248ms total)
02-00000000-00-00000273-0048: T26CC 000:198 AP[4]: Skipped. No ROM table (AHB-AP ROM base: 0x00000000)
02-00000000-00-00000591-01B3:   ***** Error: Could not find core in Coresight setup J-Link Script File: Executing InitTarget() *************************************************J-Link script: iMX7D Cortex-M4 core J-Link script************************************************* J-Link Script File: Executing InitTarget() *************************************************J-Link script: iMX7D Cortex-M4 core J-Link script*************************************************
02-00000000-00-00000591-0025:   returns 0x01 (0399ms, 0566ms total)
03-00000000-00-00000596-005F: ERROR: Bad JTAG communication: Write to IR: Expected 0x1, got 0xF (TAP Command : 10) @ Off 0x5.
03-00000000-00-00000596-0026: Could not find core in Coresight setup
03-00000000-00-00000597-0023: ERROR: Could not connect to target.
03-00000000-00-00000597-0035: Target connection failed. GDBServer will be closed...
03-00000000-00-00000611-0037: Restoring target state and closing J-Link connection...
02-00000000-00-00000611-0041: T26CC 000:617 JLINK_IsOpen()  returns 0x01 (0000ms, 0566ms total)
02-00000000-00-00000611-0058: T26CC 000:617 JLINK_ExecCommand("ClrAllBPs", ...).   returns 0x00 (0000ms, 0566ms total)
03-00000000-00-00000625-0010: Shutting down...