Hi there, I am using an Atmel SAM-ICE with IAR Kickstart edition. I can download to Flash using the IAR IDE, but not with the J-Link ARM program. It says that a license is required. I thought that no license is required if I am using the SAM-ICE JTAG? Is there some additional setup I need to do?
Regards
Edit: I am using an Atmel AT91SAM7S64 device.
I found this comment which appears to state that no license is required with SAM-ICE for Atmel parts, forum.sparkfun.com/viewtopic.php?p=87067 by "RolfSegger"
Regards
Edit: I am using an Atmel AT91SAM7S64 device.
I found this comment which appears to state that no license is required with SAM-ICE for Atmel parts, forum.sparkfun.com/viewtopic.php?p=87067 by "RolfSegger"
I'm not sure if "RolfSegger" is really from Segger or just a user.Flash download works (does not need an extra license) with the SEGGER J-Link software on all supported devices. Supported devices are
most popular ARM-based microcontrollers, so all popular
ATMEL AT91 devices (and many other of course) are supported.
Again, there is no extra license required; the only thing you need is a
half-way recent version of the software.
In case of doubt, donwload it from segger.com/cms/jlink-software.html
Flash download is free (not requiring a license) for J-Links and OEM versions of J-Link, such as SAM-ICE. An other option with J-Link and SAM-ICE is always to use OpenOCD with it.
The post was edited 1 time, last by bobc ().