Friday, July 21st 2017, 10:47am UTC+2

You are not logged in.

  • Login
  • Register

Dear visitor, welcome to SEGGER Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Weltgeist

Beginner

Date of registration: Jan 29th 2008

Posts: 1

1

Tuesday, January 29th 2008, 11:14am

HexLoad issues, CRC check failed

Hi!

We're having some problems regarding the HexLoad utility. At the moment we are using HexLoad v2.14i to upgrade a firmware through Btl v3.0.

About one fifth of the upgrades results in CRC check failed with no apparent reason, we've tried inserting level converters into the signal chain to clean up the signal, different COM-port brands and newer versions of the HexLoad-utility without any success.

Also, the HexLoad process has a bad habit of remaining unterminated whenever an error occurs, forcing the user to start the task manager and explicitly terminate the process to be able to use the COM-port again.

Has anyone had these issues before? We could greatly appreciate any insight into these problems.



Best regards,

Andreas Eriksson

FBerkel

Beginner

Date of registration: Feb 13th 2008

Posts: 4

2

Wednesday, February 13th 2008, 11:40am

Hello Andreas,

we also use HexLoad since several years and we also had similar problems with remaining processes with the old version v2.14 of the tool. With the new version (v3.04d) we not have this problems and we never had CRC problems. You should check the communication protocol between target and PC to check if there are any problems. There exists a documentation about this called emLoad3_Communication.pdf.


Regards,

Floyd