Hello,
I'm using J-Link tools version 6.32c and trying to test the remote server function with a USB J-Link. I run remote server on one Windows 10 machine. I then launch J-Link Commander on the second Windows 10 machine within the same LAN.
After executing a connect command I eventually receive a message box on Remote Server stating "Unknown EMU command #28 received. Discontinuing parsing of communication".
Thank you for your help,
Jim
Below is a capture of the Commander console and error.
Type "connect" to establish a target connection, '?' for help
J-Link>connect
Please specify device / core. : STM32F412RG
Type '?' for selection dialog
Device>
Please specify target interface:
J) JTAG (Default)
S) SWD
TIF>S
Specify target interface speed [kHz]. : 4000 kHz
Speed>
Device "STM32F412RG" selected.
Connecting to target via SWD
Found SW-DP with ID 0x2BA01477
Device will be unsecured now.
Found SW-DP with ID 0x2BA01477
Scanning AP map to find all available APs
AP[1]: Stopped AP scan as end of AP map has been reached
AP[0]: AHB-AP (IDR: 0x24770011)
Iterating through AP map to find AHB-AP to use
AP[0]: Core found
AP[0]: AHB-AP ROM base: 0xE00FF000
CPUID register: 0x410FC241. Implementer code: 0x41 (ARM)
Found Cortex-M4 r0p1, Little endian.
FPUnit: 15 code (BP) slots and 15 literal slots
CoreSight components:
ROMTbl[0] @ E00FF000
****** Error: Communication timed out: Requested 4 bytes, received 0 bytes !
Cannot connect to target.
I'm using J-Link tools version 6.32c and trying to test the remote server function with a USB J-Link. I run remote server on one Windows 10 machine. I then launch J-Link Commander on the second Windows 10 machine within the same LAN.
After executing a connect command I eventually receive a message box on Remote Server stating "Unknown EMU command #28 received. Discontinuing parsing of communication".
Thank you for your help,
Jim
Below is a capture of the Commander console and error.
Type "connect" to establish a target connection, '?' for help
J-Link>connect
Please specify device / core. : STM32F412RG
Type '?' for selection dialog
Device>
Please specify target interface:
J) JTAG (Default)
S) SWD
TIF>S
Specify target interface speed [kHz]. : 4000 kHz
Speed>
Device "STM32F412RG" selected.
Connecting to target via SWD
Found SW-DP with ID 0x2BA01477
Device will be unsecured now.
Found SW-DP with ID 0x2BA01477
Scanning AP map to find all available APs
AP[1]: Stopped AP scan as end of AP map has been reached
AP[0]: AHB-AP (IDR: 0x24770011)
Iterating through AP map to find AHB-AP to use
AP[0]: Core found
AP[0]: AHB-AP ROM base: 0xE00FF000
CPUID register: 0x410FC241. Implementer code: 0x41 (ARM)
Found Cortex-M4 r0p1, Little endian.
FPUnit: 15 code (BP) slots and 15 literal slots
CoreSight components:
ROMTbl[0] @ E00FF000
****** Error: Communication timed out: Requested 4 bytes, received 0 bytes !
Cannot connect to target.