[ABANDONED] Incorrect IPSR value reported for ATSAME70Q21

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] Incorrect IPSR value reported for ATSAME70Q21

    Hello,

    It appears that JLinkExe reports the incorrect value for IPSR when debugging an ATSAME70Q21 over SWD. In my case, I have halted execution in an ISR with exception # 0x27. When I halt, the value of XPSR is displayed by the JLink software as 0x21000027, but IPSR is displayed as 0x007 (Reserved). Based on the value of XPSR, IPSR should indicate 0x0027.

    Details of setup:

    Segger JLink Pro v4 compiled Feb 16 2018 13:04:59
    Hardware V4.00

    Segger J-Link Commander v6.30d
    DLL Version V6.30d

    Host machine: Ubuntu 16.04.1
  • Hello,

    Thank you for your inquiry.
    Such an issue is not known to us.
    Are you debugging custom hardware or an eval board?
    Could you provide us with a reproduction scenario?

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.