[SOLVED] oZone reset behavior

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] oZone reset behavior

    I use oZone with a J-Trace for ARM Cortex-M on a Nordic nRF52832. When resetting the system, I see different behavior with tracing disabled, also different behavior on first start. It seems oZone just reads the start address from the ELF file and jumps to that address, is that right? Can I change this behavior so that it mimics a true cold reset (through the bootloader, using the MBR etc.)?
  • Hello,

    Thank you for your inquiry.
    The following thread should shed some light onto this.
    [SOLVED] Ozone: v2.56 regression with Nordic SoftDevice (S140, nRF52840)

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.