[SOLVED] Jlink-Base Orange LED

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Jlink-Base Orange LED

    Dear people,

    I'm using JLINK-Base in JTAG interface it is connected to a kamami isolator and i try to connect it to my electronic circuit where I am using BGM11S blue gecko chip. I can't get it working I am still kind of newbie in hardware engineering and have no idea how to resolve , the issue is happening when I connect the RESET pin from my JLINK to the reset pin of KANAMI . When I use SEGGER J-LINK GDB Server the log is showing me the following :


    02-00000000-00-00001425-005A: ResetTarget(): PCode returned with error code 1 returns 0xFFFFFFFF (1101ms, 1425ms total)
    03-00000000-00-00001425-0038: ERROR: ResetTarget(): PCode returned with error code 1


    03-00000000-00-00001425-0035: Target connection failed. GDBServer will be closed...
    02-00000000-00-00002401-004D: T5CFB5700 002:401 JLINK_GetHWStatus(...) returns 0x00 (0000ms, 1425ms total)
    03-00000000-00-00003435-0038: Restoring target state and closing J-Link connection...

    02-00000000-00-00003436-0045: T5D7B6700 003:436 JLINK_IsOpen() returns 0x01 (0000ms, 1425ms total)
    02-00000000-00-00003436-005C: T5D7B6700 003:436 JLINK_ExecCommand("ClrAllBPs", ...). returns 0x00 (0000ms, 1425ms total)
  • Hello,

    Thank you for your inquiry.
    Does a connect work with the J-Link commander? wiki.segger.com/J-Link_cannot_…ty_using_J-Link_Commander

    Does a connect work with the isolator removed?
    Third party isolators sometimes have sub par coupling ICs installed which can lead to timing problems on the JTAG lanes.
    That is why we offer our own set of isolators which are guaranteed to be working with J-Link: segger.com/products/debug-prob…ories/isolators/overview/

    Also the BGM11S is officially not listed as officially supported by J-Link. segger.com/downloads/supported-devices.php

    Which devices are you selecting to connect to the target device?
    If they are not compatible it might already be the answer why it is not working.

    We will see if we can get our hands on this particular target device to verify functionality and add support.

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.