Hello,
in the past i got a answer how to use STemwin with a SSD1963 controller.
Now it was able for me to connect and control the SSD1963.
Here my system
-STM32F103VET6 (CZ miniSTM32F103V_-EX-Board)
-TFT 7 Zoll with SSD1963
-TFT connected over FSMC with 16 bit data and the control signals (REST, RS, CS, RD, WR) the MCU
It was able for me to init (call the function "LCD_Init()" direct)
and write in the memory (call the function "LCD_Fill(0xFFE0)" for yellow)
of the SSD1963 to colored the whole screen in yellow color.
==> Connection should work.
But is was not able for me to adapt STemwin in my system.
I found out after call "GUI_Init();" the function "LCD_X_DisplayDriver" got only on call with the value "LCD_X_SETORG".
No initialisation (LCD_X_INITCONTROLLER) of the tft ("LCD_Init()") is performed.
The SysTick_Handler is called periodically.
Maybe someone can give me a tip.
Thanks
Bernhard
in the past i got a answer how to use STemwin with a SSD1963 controller.
Now it was able for me to connect and control the SSD1963.
Here my system
-STM32F103VET6 (CZ miniSTM32F103V_-EX-Board)
-TFT 7 Zoll with SSD1963
-TFT connected over FSMC with 16 bit data and the control signals (REST, RS, CS, RD, WR) the MCU
It was able for me to init (call the function "LCD_Init()" direct)
and write in the memory (call the function "LCD_Fill(0xFFE0)" for yellow)
of the SSD1963 to colored the whole screen in yellow color.
==> Connection should work.
But is was not able for me to adapt STemwin in my system.
I found out after call "GUI_Init();" the function "LCD_X_DisplayDriver" got only on call with the value "LCD_X_SETORG".
No initialisation (LCD_X_INITCONTROLLER) of the tft ("LCD_Init()") is performed.
The SysTick_Handler is called periodically.
Maybe someone can give me a tip.
Thanks
Bernhard