STA2062A2
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
-
Hello,
Thank you for your inquiry.
This is the first time we hear about the STA2062A2.
We also can't find any documentation about it on ST's website.
Could you provide us with a documentation?
What kind of board is this? An eval board or custom hardware?
Best regards,
NinoPlease read the forum rules before posting.
Keep in mind, this is *not* a support forum.
Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
Should you be entitled to support you can contact us via our support system: segger.com/ticket/
Or you can contact us via e-mail. -
hi
dear NINO
Thank you so much
just for answering me
the electronic card in the picture
is "FIAT BLUE AND ME" a control unit
installed in the new fiat
Punto panda lancia-y Alfa Mito fiat 500 etc .......
they are very delicate indeed if
we disconnect the battery from one of these cars
when still the card is not completely off
the firmware is broken
I have about 10 in the laboratory
to restore, if I find a way to read that chip
I could read a still good card
and write the others
thank youThe post was edited 1 time, last by tecnocar ().
-
Hello,
Thank you for the additional information.
Please understand that we can't add support for that device officially if there is no public documentation or official eval board from ST.
But we offer the open Flash loader interface to our customers that can be used to add support themselves: wiki.segger.com/Adding_Support_for_New_Devices
For general connection to the device we suggest trying to select generic ARM9 core when connecting. If that does not work instantly additional steps are necessary that can be added using J-Link script files. More information about this can be found in the J-Link user manual.
For more information about the target device we suggest getting in contact with ST.
Best regards,
NinoPlease read the forum rules before posting.
Keep in mind, this is *not* a support forum.
Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
Should you be entitled to support you can contact us via our support system: segger.com/ticket/
Or you can contact us via e-mail.
-
Share
- Facebook 0
- Twitter 0
- Google Plus 0
- Reddit 0