Thursday, May 24th 2018, 8:10am UTC+2

You are not logged in.

  • Login
  • Register

Dear visitor, welcome to SEGGER Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Date of registration: Jan 18th 2018

Posts: 3


Tuesday, March 27th 2018, 9:40am

OS_Delayus() not fast enough


I've noticed that when I use OS_Delayus() the actual delay I receive never goes below 1 [ms], this is something new I am experiencing (in the past the delay was much more accurate).
I can't put my finger on what has changed that causes this so I want to ask what can effect this delay function in such a way?

NOTE: I am currently not running any tasks.

1. Which embOS do you use?
I use embOS trial for Cortex-M and IAR compiler version 4.40 with IAR workbench 8.20.1 (embOS_CortexM_IAR_V8_Trial_V440).

2. Which CPU and eval board do you use?
I use Silicon Labs EFR32FG13P231F512GM48 cpu.



Super Moderator

Date of registration: Nov 14th 2007

Posts: 271


Tuesday, March 27th 2018, 9:45am

Hi Lior,

did you make any changes to the board support package, especially OS_GetTime_Cycles()?
I'll check if we have the same device/evalboard here and give it a try.
But I am pretty sure it should work as expected.

Best regards,

Similar threads