[SOLVED] How to get 5V out of the Segger Jlink EDU Mini?

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] How to get 5V out of the Segger Jlink EDU Mini?

    Hi there,
    I'd like to both power my board with 5V through USB and do SWD programming. There is another device that does this sold in dev kits by Analog devices but they do not sell it separately - so I know it is possible to do!

    The Jlink edu mini comes with a 20 pin cable, and says it can do JTAG programming and in the manual has the standard JTAG pin out which includes 5V supply. Is there any way I can get 5V out AND do SWD programming? Please help!

    segger.com/products/debug-prob…k/models/j-link-edu-mini/

  • Hello,

    the J-Link EDU-Mini does not support supplying target devices with 5 V.

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.