[ABANDONED] Error: Could not find core in Coresight setup - J-Link Lite/TMPM369FDXBG

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] Error: Could not find core in Coresight setup - J-Link Lite/TMPM369FDXBG

    I've got a Toshiba BMSKTOPASM369BT551 dev kit with an TMPM369FDXBG ARM Cortex M3 MCU + a JLink Lite.

    Before, I've managed to compile a simple blink app and even debug it in Ozone (I also have J-Link Plus)
    Now, and I'm not aware of any changes to my hardware, I get the error below.

    What does it mean? What might be broken and or anything I can try to fix it?

    Thanks!
    Matthias

    Debug.Start();
    J-Link: Device "TMPM369FDXBG" selected.
    J-Link: Found SW-DP with ID 0x2BA01477
    J-Link: Scanning AP map to find all available APs
    J-Link: AP[0]: Stopped AP scan as end of AP map seems to be reached
    J-Link: Iterating through AP map to find AHB-AP to use
    J-Link: Found SW-DP with ID 0x2BA01477
    J-Link: Scanning AP map to find all available APs
    J-Link: AP[1]: Stopped AP scan as end of AP map has been reached
    J-Link: AP[0]: AHB-AP (IDR: 0x24770011)
    J-Link: Iterating through AP map to find AHB-AP to use
    J-Link: AP[0]: Core found
    J-Link: AP[0]: AHB-AP ROM base: 0xE00FF000
    J-Link: CPUID register: 0x412FC231. Implementer code: 0x41 (ARM)
    J-Link: Found Cortex-M3 r2p1, Little endian.
    J-Link: FPUnit: 0 code (BP) slots and 0 literal slots
    J-Link: CoreSight components:
    J-Link: ROMTbl[0] @ E00FF000
    J-Link: Could not find core in Coresight setup
    J-Link: connected to target device
    J-Link: connection to target device lost.


    Similar, in JLinkExe, I get this:

    $ JLinkExe
    SEGGER J-Link Commander V6.30b (Compiled Feb 2 2018 18:41:11)
    DLL version V6.30b, compiled Feb 2 2018 18:41:01

    Connecting to J-Link via USB...O.K.
    Firmware: J-Link Lite-Cortex-M V8 compiled Sep 15 2016 12:05:01
    Hardware version: V8.00
    S/N: 528001296
    License(s): GDB
    VTref = 3.293V


    Type "connect" to establish a target connection, '?' for help
    J-Link>connect
    Please specify device / core. <Default>: TMPM369FDXBG
    Type '?' for selection dialog
    Device>
    Please specify target interface:
    J) JTAG (Default)
    S) SWD
    TIF>S
    Specify target interface speed [kHz]. <Default>: 4000 kHz
    Speed>
    Device "TMPM369FDXBG" selected.


    Connecting to target via SWD
    Found SW-DP with ID 0x2BA01477
    Scanning AP map to find all available APs
    AP[1]: Stopped AP scan as end of AP map has been reached
    AP[0]: AHB-AP (IDR: 0x24770011)
    Iterating through AP map to find AHB-AP to use
    AP[0]: Skipped. Could not read CPUID register
    Found SW-DP with ID 0x2BA01477
    Scanning AP map to find all available APs
    AP[1]: Stopped AP scan as end of AP map has been reached
    AP[0]: AHB-AP (IDR: 0x24770011)
    Iterating through AP map to find AHB-AP to use
    AP[0]: Core found
    AP[0]: AHB-AP ROM base: 0xE00FF000

    ****** Error: Could not find core in Coresight setup
    Found SW-DP with ID 0x2BA01477
    Scanning AP map to find all available APs
    AP[0]: Stopped AP scan as end of AP map seems to be reached
    Iterating through AP map to find AHB-AP to use
    Found SW-DP with ID 0x2BA01477
    Scanning AP map to find all available APs
    AP[1]: Stopped AP scan as end of AP map has been reached
    AP[0]: AHB-AP (IDR: 0x24770011)
    Iterating through AP map to find AHB-AP to use
    AP[0]: Core found
    AP[0]: AHB-AP ROM base: 0xE00FF000
    CPUID register: 0x412FC231. Implementer code: 0x41 (ARM)
    Found Cortex-M3 r2p1, Little endian.
    FPUnit: 0 code (BP) slots and 0 literal slots
    CoreSight components:
    ROMTbl[0] @ E00FF000
    Cannot connect to target.
    J-Link>
  • Hello,

    Thank you for your inquiry.
    Such an issue is not known to us.
    For reproduction we used a J-Link Plus, J-Link software V6.30b and eval board BMSKTOPASM369 v1.
    Attached is the successful connect with J-Link Commander.

    So everything is working as expected. You write you also have a J-Link Plus, could you try that one instead.
    Does that work?

    Best regards,
    Nino
    Images
    • Capture.PNG

      34.93 kB, 677×606, viewed 854 times
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.