I'm using K64 chip. The bin file shows the flash is not secured. See attached (address 0x40C, FSEC register).
Nevertheless, whenever flashing with Segger, I'm getting the following message:
"Your application message would set the system securityand/or disable the mass erase functionality of the device.
This is not supported in the current configuration.
Application data has been changed accordingly."And I need to Unlock using J-Link commander.
How can it be?
Nevertheless, whenever flashing with Segger, I'm getting the following message:
"Your application message would set the system securityand/or disable the mass erase functionality of the device.
This is not supported in the current configuration.
Application data has been changed accordingly."And I need to Unlock using J-Link commander.
How can it be?