Hello all,
I get the following error (see screenshot attached) when I enable trace (4 pin) in Keil µVision V5.22 with STM32F767 connected.
The webserver of the J-Trace Pro shows this:
Trace status
Trace clock:0 kHz
Half-sync detection:0x00000000 (Not O.K. no half-sync pattern detected)
Last incorrect half-sync sampled:0x00000000
The trace connector seems to be correct (see 2nd attachment).
SYS_TRACECLK = PE2
SYS_TRACED0 = PG13
SYS_TRACED1 = PE4
SYS_TRACED2 = PE5
SYS_TRACED3 = PE6
What did I do wrong?
Kind regards
Marcus
I get the following error (see screenshot attached) when I enable trace (4 pin) in Keil µVision V5.22 with STM32F767 connected.
The webserver of the J-Trace Pro shows this:
Trace status
Trace clock:0 kHz
Half-sync detection:0x00000000 (Not O.K. no half-sync pattern detected)
Last incorrect half-sync sampled:0x00000000
The trace connector seems to be correct (see 2nd attachment).
SYS_TRACECLK = PE2
SYS_TRACED0 = PG13
SYS_TRACED1 = PE4
SYS_TRACED2 = PE5
SYS_TRACED3 = PE6
What did I do wrong?
Kind regards
Marcus