I have this CYW943907AEVAL1F Dev kit and trying to flash bin files to this MCU. But I am seeing this error (refer the screenshot).
Please let me know how to solve this issue.
Connection Status
Application log started
- J-Flash V6.20h (J-Flash compiled Oct 27 2017 16:23:08)
- JLinkARM.dll V6.20h (DLL compiled Oct 27 2017 16:22:47)
Opening project file [C:\Program Files (x86)\SEGGER\JLink_V620h\Samples\JFlash\ProjectFiles\WifiEvalBoard_HK_20171115a.jflash] ...
- Project opened successfully
Failed to open data file [C:\Hari\Projects\DRC\Wip\APPS.bin]...
Connecting ...
- Connecting via USB to J-Link device 0
- Target interface speed: 4000 kHz (Fixed)
- VTarget = 3.328V
- Executing init sequence ...
- Initialized successfully
- Target interface speed: 4000 kHz (Fixed)
- J-Link found 1 JTAG device. Core ID: 0x5BA00477 (None)
- Connected successfully
Blank Check Status
Blank checking target ...
- 1 of 1 sectors selected, 1 range, 0x8000 - 0xFFFFFFFF
- Start of determining flash info (Bank 0 @ 0x00008000)
- ERROR: Could not find CFI compliant flash device
- Error while determining flash info (Bank 0 @ 0x00008000)
- End of determining flash info
- Flash bank info:
- 1 * 4194272 KB @ 0x00008000
- ERROR: Failed to check blank target
Disconnecting ...
- Disconnected
Programming Bin File Status
Opening data file [C:\Hari\Projects\DRC\Wip\binfiles\2_DCT.bin] ...
- Data file opened successfully (8000 bytes, 1 range, CRC of data = 0xF4CF9E2D, CRC of file = 0xF4CF9E2D)
Checking if selected data fits into selected flash sectors.
Programming target (8000 bytes, 1 range) ...
- Connecting ...
- ERROR: Could not read CP15 register.
- ERROR: Failed to connect.
Could not perform custom init sequence.
- ERROR: Could not program target, not connected
Please let me know how to solve this issue.
Connection Status
Application log started
- J-Flash V6.20h (J-Flash compiled Oct 27 2017 16:23:08)
- JLinkARM.dll V6.20h (DLL compiled Oct 27 2017 16:22:47)
Opening project file [C:\Program Files (x86)\SEGGER\JLink_V620h\Samples\JFlash\ProjectFiles\WifiEvalBoard_HK_20171115a.jflash] ...
- Project opened successfully
Failed to open data file [C:\Hari\Projects\DRC\Wip\APPS.bin]...
Connecting ...
- Connecting via USB to J-Link device 0
- Target interface speed: 4000 kHz (Fixed)
- VTarget = 3.328V
- Executing init sequence ...
- Initialized successfully
- Target interface speed: 4000 kHz (Fixed)
- J-Link found 1 JTAG device. Core ID: 0x5BA00477 (None)
- Connected successfully
Blank Check Status
Blank checking target ...
- 1 of 1 sectors selected, 1 range, 0x8000 - 0xFFFFFFFF
- Start of determining flash info (Bank 0 @ 0x00008000)
- ERROR: Could not find CFI compliant flash device
- Error while determining flash info (Bank 0 @ 0x00008000)
- End of determining flash info
- Flash bank info:
- 1 * 4194272 KB @ 0x00008000
- ERROR: Failed to check blank target
Disconnecting ...
- Disconnected
Programming Bin File Status
Opening data file [C:\Hari\Projects\DRC\Wip\binfiles\2_DCT.bin] ...
- Data file opened successfully (8000 bytes, 1 range, CRC of data = 0xF4CF9E2D, CRC of file = 0xF4CF9E2D)
Checking if selected data fits into selected flash sectors.
Programming target (8000 bytes, 1 range) ...
- Connecting ...
- ERROR: Could not read CP15 register.
- ERROR: Failed to connect.
Could not perform custom init sequence.
- ERROR: Could not program target, not connected