Could you please give me a help?
I try to download the file of *.bin into target FLASH ROM.
The configuration of project setting is:
JTAG speed: 5KHz;
JTAG scan chain information: auto;
Project:AT91R40008_AT91EB40A.jflash;
flash: M29W160ET
I connected JTAG cable to JTAG port on PCB and then power on the PCB. After power on PCB, I perform the 'connect' function in the manu of target of Jflash.
The following message is the output of Jflash:
"Connecting ...
- Connecting via USB to J-Link device 0
- Target interface speed: 5 kHz (Fixed)
- VTarget = 3.209V
- Executing init sequence ...
- ERROR: Could not perform target reset
- ERROR: Failed to connect.
Could not perform custom init sequence.
"
I try to download the file of *.bin into target FLASH ROM.
The configuration of project setting is:
JTAG speed: 5KHz;
JTAG scan chain information: auto;
Project:AT91R40008_AT91EB40A.jflash;
flash: M29W160ET
I connected JTAG cable to JTAG port on PCB and then power on the PCB. After power on PCB, I perform the 'connect' function in the manu of target of Jflash.
The following message is the output of Jflash:
"Connecting ...
- Connecting via USB to J-Link device 0
- Target interface speed: 5 kHz (Fixed)
- VTarget = 3.209V
- Executing init sequence ...
- ERROR: Could not perform target reset
- ERROR: Failed to connect.
Could not perform custom init sequence.
"