[ABANDONED] JFLASH Error:could not perform target reset

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] JFLASH Error:could not perform target reset

    Could you please give me a help?
    I try to download the file of *.bin into target FLASH ROM.
    The configuration of project setting is:
    JTAG speed: 5KHz;
    JTAG scan chain information: auto;
    Project:AT91R40008_AT91EB40A.jflash;
    flash: M29W160ET

    I connected JTAG cable to JTAG port on PCB and then power on the PCB. After power on PCB, I perform the 'connect' function in the manu of target of Jflash.
    The following message is the output of Jflash:
    "Connecting ...

    - Connecting via USB to J-Link device 0
    - Target interface speed: 5 kHz (Fixed)
    - VTarget = 3.209V
    - Executing init sequence ...
    - ERROR: Could not perform target reset
    - ERROR: Failed to connect.
    Could not perform custom init sequence.
    "
  • Hi,

    could you please provide us with the serial number of your SEGGER product?
    Could you please provide us with a screenshot of J-Flash?

    Best regards,
    Niklas
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.