[ABANDONED] Broken J-Link Base (VTref = 0.00V)

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] Broken J-Link Base (VTref = 0.00V)

    Hi,

    Just between two debug sessions one of my J-Link probe died :(

    device measures the VTref as 0.00V.
    It's verified with different J-Link unit and voltage is measured with multimeter to be 3.3V
    is this something you have seen happening?

    Device is J-Link base v9.3 (build 15-32)

    Is there anything we ca do about this.
  • Hi,


    sorry to hear that you experience issues with the J-Link.
    To be clear: it does still enumerate (J-Link LED is blinking and then steady green after connecting to PC)?

    It works when using another J-Link? Are you using to same target interface cable with both J-Links?


    Best regards,
    Niklas
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.