[SOLVED] Flasher ARM stand-alone and target power supply

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Flasher ARM stand-alone and target power supply

    Hello,

    I would like to use the Flasher ARM in stand-alone mode, and I need to power the target using the 5V coming from the pin 19 of the ribbon cable. From J-Link it is easy to do, however is there a way to do this in the stand-alone mode (with a script maybe ?) so that the target gets the power after the start/stop button has been pushed, and after the programming has finished then the power is removed ?

    Best regards,
    Carl
  • Hi Carl,


    there is an Option "Enable target power" in the "Production" tab of the J-Flash project settings.

    Best regards,
    Niklas
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.