Hi there,
From the help i found in this forum i managed to port emwin to my custom pcb with a tft screen with ST7735 controller. The interface i used was SPI.
Thanks a lot. I need some more help.
I am now finalizing the functionality of my custom pcb. I use an LPC4367 microcontroller and a TFT 320x240 with an ILI9341 controller. Pcb has an external sdram of 64mbyte.
All components are working. TFT without emwin is working. The interface that i am using is RGB interface. LPC4367 has its own lcd controller and provides the timings of hsync vsync etc.
ILI9341 which is the onboard TFT LCD module is configured to function under rgb interface. Everything works fine
My final desirable setting is using RGB interface and having emwin on top.
I have tried to port my previous working emwin code of SPI to RGB but i cannot find any information that explains well enough the relation between RGB interface and emwin.
Can I please have some help?
If a discussion opens i am willing to share any specific information about my code and where the problems are.
Thanks a lot in advance!
From the help i found in this forum i managed to port emwin to my custom pcb with a tft screen with ST7735 controller. The interface i used was SPI.
Thanks a lot. I need some more help.
I am now finalizing the functionality of my custom pcb. I use an LPC4367 microcontroller and a TFT 320x240 with an ILI9341 controller. Pcb has an external sdram of 64mbyte.
All components are working. TFT without emwin is working. The interface that i am using is RGB interface. LPC4367 has its own lcd controller and provides the timings of hsync vsync etc.
ILI9341 which is the onboard TFT LCD module is configured to function under rgb interface. Everything works fine
My final desirable setting is using RGB interface and having emwin on top.
I have tried to port my previous working emwin code of SPI to RGB but i cannot find any information that explains well enough the relation between RGB interface and emwin.
Can I please have some help?
If a discussion opens i am willing to share any specific information about my code and where the problems are.
Thanks a lot in advance!
The post was edited 2 times, last by disideris ().