Our task is to program a given binary into the MK60DN512VLQ10.
We tried J-Link-Lite 6.20c with
- Device MK60DN512xxx10 and MK60DN512xxx10 (allow security)
- Interface SWD and JTAG
- Speed 1000kHz or 4000kHz
and got always following output.
#####################################################################
Erasing MK60DN512xxx10 (allow security) via JTAG-Interface@1000kHz
Erase Thread started.
Device "MK60DN512XXX10 (ALLOW SECURITY)" selected.
InitTarget()
Device will be unsecured now.
Timeout while unsecuring device. Erase never starts.
TotalIRLen = 4, IRPrint = 0x01
JTAG chain detection found 1 devices:
#0 Id: 0x4BA00477, IRLen: 04, CoreSight JTAG-DP
Scanning AP map to find all available APs
AP[2]: Stopped AP scan as end of AP map has been reached
AP[0]: AHB-AP (IDR: 0x24770011)
AP[1]: JTAG-AP (IDR: 0x001C0000)
Iterating through AP map to find AHB-AP to use
AP[0]: Skipped. Invalid implementer code read from CPUIDVal[31:24] = 0x00
AP[1]: Skipped. Not an AHB-AP
Scanning AP map to find all available APs
AP[2]: Stopped AP scan as end of AP map has been reached
AP[0]: AHB-AP (IDR: 0x24770011)
AP[1]: JTAG-AP (IDR: 0x001C0000)
Iterating through AP map to find AHB-AP to use
AP[0]: Skipped. Invalid implementer code read from CPUIDVal[31:24] = 0x00
AP[1]: Skipped. Not an AHB-AP
InitTarget()
Device will be unsecured now.
Timeout while unsecuring device. Erase never starts.
TotalIRLen = 4, IRPrint = 0x01
JTAG chain detection found 1 devices:
#0 Id: 0x4BA00477, IRLen: 04, CoreSight JTAG-DP
Could not find core in Coresight setup
Erase Thread exited
Initialization of debug session failed.
Could not connect to target.
#####################################################################
Also in the J-Link-Commander 6.20c we had simlilar Errors.
As said above our task is only to programm the device with a given firmware in binary format once.
Is ther a simple solution with our J-Link EDU MINI?
We tried J-Link-Lite 6.20c with
- Device MK60DN512xxx10 and MK60DN512xxx10 (allow security)
- Interface SWD and JTAG
- Speed 1000kHz or 4000kHz
and got always following output.
#####################################################################
Erasing MK60DN512xxx10 (allow security) via JTAG-Interface@1000kHz
Erase Thread started.
Device "MK60DN512XXX10 (ALLOW SECURITY)" selected.
InitTarget()
Device will be unsecured now.
Timeout while unsecuring device. Erase never starts.
TotalIRLen = 4, IRPrint = 0x01
JTAG chain detection found 1 devices:
#0 Id: 0x4BA00477, IRLen: 04, CoreSight JTAG-DP
Scanning AP map to find all available APs
AP[2]: Stopped AP scan as end of AP map has been reached
AP[0]: AHB-AP (IDR: 0x24770011)
AP[1]: JTAG-AP (IDR: 0x001C0000)
Iterating through AP map to find AHB-AP to use
AP[0]: Skipped. Invalid implementer code read from CPUIDVal[31:24] = 0x00
AP[1]: Skipped. Not an AHB-AP
Scanning AP map to find all available APs
AP[2]: Stopped AP scan as end of AP map has been reached
AP[0]: AHB-AP (IDR: 0x24770011)
AP[1]: JTAG-AP (IDR: 0x001C0000)
Iterating through AP map to find AHB-AP to use
AP[0]: Skipped. Invalid implementer code read from CPUIDVal[31:24] = 0x00
AP[1]: Skipped. Not an AHB-AP
InitTarget()
Device will be unsecured now.
Timeout while unsecuring device. Erase never starts.
TotalIRLen = 4, IRPrint = 0x01
JTAG chain detection found 1 devices:
#0 Id: 0x4BA00477, IRLen: 04, CoreSight JTAG-DP
Could not find core in Coresight setup
Erase Thread exited
Initialization of debug session failed.
Could not connect to target.
#####################################################################
Also in the J-Link-Commander 6.20c we had simlilar Errors.
As said above our task is only to programm the device with a given firmware in binary format once.
Is ther a simple solution with our J-Link EDU MINI?